Description
USB-to-CAN FD interface converter, electrical isolation, industrial-grade CAN bus data analyzer communication module
Description:
USB-CAN-FD is a high-performance, industrial-grade USB-to-CANFD interface converter, a CAN/CAN-FD bus communication interface card, and a CAN/CANFD protocol data analyzer.
It integrates two independent CAN FD interfaces with galvanic isolation and multiple protection circuits; support for Windows XP/7/8/10/11 systems, provision of drivers, CAN FD Tools-related software, examples and tutorials for secondary development calls, etc.
It can be connected via USB to a PC or an industrial control host to perform transmit and receive control, data analysis, and the acquisition and monitoring of the CAN/CANFD bus network.
This product is small and easy to use. It can be used for introductory learning and debugging of the CAN/CANFD bus. It can also be used for secondary development and integration into various industrial, energy communication, and intelligent control application scenarios that require CAN/CANFD bus communication.
Specifications:
Type: Industrial quality: USB to CAN-FD interface converter, CAN/CAN-FD bus communication interface card, CAN/CAN-FD protocol data analyzer
USB interface:
Operating level: 5V (direct power supply via USB port, no additional power adapter required)
Interface type: USB-B type interface
CAN/CAN FD interface:
Number of CAN/CAN FD channels: two channels: CAN1 and CAN2 (independent of each other, completely isolated, isolation voltage 3000 VDC)
Interface type: Terminal interface (OPEN6 spacing 5.08 mm)
Suitable resistor: Each CAN/CANFD has two built-in 120-Ω termination resistors that can be activated via switches.
Communication rate: 100 Kbit/s ~ 5 Mbit/s (software configurable)
Protocol support: CAN2.0A and 2.0BISO11898-1CAN FD protocol specification V1.0 protocol
Ability to send and receive data: Each CAN/CAN FD can receive 20,000 frames/s and transmit 5,000 frames/s.
Data transceiver buffer: Each CAN/CANFD receive buffer contains 1500 frames and the transmit buffer contains 64 frames (automatic retransmission if transmission fails).
Warning light:
PWR: Operating indicator light
SYS: System status indicator, normally off; if a fault occurs on the bus, it is always on.
CAN1: CAN1 channel indicator light (flashes when sending and receiving data)
CAN2: CAN2 channel indicator (flashes when sending and receiving data)
Supported system: Windows: Windows XP/7/8/10/11 (32-bit and 64-bit) does not currently support Linux systems; the corresponding driver is under development.
Operating temperature: -40~85℃
Housing material: Metal housing made of aluminum alloy + flame-retardant 3D-Insulating louvers on both sides; This shell design and material combination can better prevent discharge from the metal tip and improve the safety factor and lifespan of the product.
Product size: 104 x 70 x 25 mm
Package contents:
1x USB-CAN FD
1x USB cable type A to type B
1x 4-pin cable
1x screwdriver
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert support: We solve your installation and product problems.
Description:
USB-CAN-FD is a high-performance, industrial-grade USB-to-CANFD interface converter, a CAN/CAN-FD bus communication interface card, and a CAN/CANFD protocol data analyzer.
It integrates two independent CAN FD interfaces with galvanic isolation and multiple protection circuits; support for Windows XP/7/8/10/11 systems, provision of drivers, CAN FD Tools-related software, examples and tutorials for secondary development calls, etc.
It can be connected via USB to a PC or an industrial control host to perform transmit and receive control, data analysis, and the acquisition and monitoring of the CAN/CANFD bus network.
This product is small and easy to use. It can be used for introductory learning and debugging of the CAN/CANFD bus. It can also be used for secondary development and integration into various industrial, energy communication, and intelligent control application scenarios that require CAN/CANFD bus communication.
Specifications:
Type: Industrial quality: USB to CAN-FD interface converter, CAN/CAN-FD bus communication interface card, CAN/CAN-FD protocol data analyzer
USB interface:
Operating level: 5V (direct power supply via USB port, no additional power adapter required)
Interface type: USB-B type interface
CAN/CAN FD interface:
Number of CAN/CAN FD channels: two channels: CAN1 and CAN2 (independent of each other, completely isolated, isolation voltage 3000 VDC)
Interface type: Terminal interface (OPEN6 spacing 5.08 mm)
Suitable resistor: Each CAN/CANFD has two built-in 120-Ω termination resistors that can be activated via switches.
Communication rate: 100 Kbit/s ~ 5 Mbit/s (software configurable)
Protocol support: CAN2.0A and 2.0BISO11898-1CAN FD protocol specification V1.0 protocol
Ability to send and receive data: Each CAN/CAN FD can receive 20,000 frames/s and transmit 5,000 frames/s.
Data transceiver buffer: Each CAN/CANFD receive buffer contains 1500 frames and the transmit buffer contains 64 frames (automatic retransmission if transmission fails).
Warning light:
PWR: Operating indicator light
SYS: System status indicator, normally off; if a fault occurs on the bus, it is always on.
CAN1: CAN1 channel indicator light (flashes when sending and receiving data)
CAN2: CAN2 channel indicator (flashes when sending and receiving data)
Supported system: Windows: Windows XP/7/8/10/11 (32-bit and 64-bit) does not currently support Linux systems; the corresponding driver is under development.
Operating temperature: -40~85℃
Housing material: Metal housing made of aluminum alloy + flame-retardant 3D-Insulating louvers on both sides; This shell design and material combination can better prevent discharge from the metal tip and improve the safety factor and lifespan of the product.
Product size: 104 x 70 x 25 mm
Package contents:
1x USB-CAN FD
1x USB cable type A to type B
1x 4-pin cable
1x screwdriver
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert support: We solve your installation and product problems.