Description
Pulsar pickup coil suitable for Kawasaki KLF300 Bayou300 1986-2006 KEF300 Lacota300 95-04 # .59026-1088
CHARACTERISTICS:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All delivered products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 piece
Type: Pick up pulse coil
Mass:
Height: 19mm
Length: 26 mm
Width: 21 mm
Mounting distance from center to center: 35 mm
Cable length: Approx. 665 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
PART NUMBER (P/N): 59026-1069, 59026-1092
VEHICLE MODELS
Suitable for Kawasaki KLF300 Bayou300 2WD 1986-1987
Suitable for Kawasaki KLF300 Bayou300 2WD 1988-2006
Suitable for Kawasaki KLF300 Bayou300 4WD 1989-2006
Suitable for Kawasaki KLF300 Bayou B 1988-2004
Suitable for Kawasaki KLF300 Bayou C 1989-2004
Suitable for Kawasaki KLF300 Bayou B Euro 1995-2006
Suitable for Kawasaki KLF300 Bayou C Euro 1995-2004
Suitable for Kawasaki KEF300 Lacota300 2WD 1995-2000
Suitable for Kawasaki KEF300 Lacota300 Sport 2WD 2001-2004
DELIVERY CONTENTS:
1x pulse coil
OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or arcing, swap the wires at the connector.
CHARACTERISTICS:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All delivered products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 piece
Type: Pick up pulse coil
Mass:
Height: 19mm
Length: 26 mm
Width: 21 mm
Mounting distance from center to center: 35 mm
Cable length: Approx. 665 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
PART NUMBER (P/N): 59026-1069, 59026-1092
VEHICLE MODELS
Suitable for Kawasaki KLF300 Bayou300 2WD 1986-1987
Suitable for Kawasaki KLF300 Bayou300 2WD 1988-2006
Suitable for Kawasaki KLF300 Bayou300 4WD 1989-2006
Suitable for Kawasaki KLF300 Bayou B 1988-2004
Suitable for Kawasaki KLF300 Bayou C 1989-2004
Suitable for Kawasaki KLF300 Bayou B Euro 1995-2006
Suitable for Kawasaki KLF300 Bayou C Euro 1995-2004
Suitable for Kawasaki KEF300 Lacota300 2WD 1995-2000
Suitable for Kawasaki KEF300 Lacota300 Sport 2WD 2001-2004
DELIVERY CONTENTS:
1x pulse coil
OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or arcing, swap the wires at the connector.
