Description
FEATURES:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 27 mm
Length: 35mm
Width: 27mm
Mounting distance from center to center: 36 mm
Cable length: approx. 410 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
PART NUMBERS):
30300-KJ9-005
30300-KN7-671
30300-KM1-014
VEHICLE MODELS EQUIPMENT:
Suitable for Honda CH125 Elite 1984
Suitable for Honda CH125 Spacy 1984-1996
Suitable for Honda CH150 Elite 1985-1987
Suitable for Honda CH150 Elite Deluxe 1985-1986
Suitable for Honda CH250 Elite 1985-1988
Suitable for Honda CN250 Helix 1986–1987/1992–2001/2004–2007
Suitable for Piaggio HAXAGON GT-GTX 250 1998-2000
DELIVERY CONTENTS:
1x Pulsar coil
NOTE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 27 mm
Length: 35mm
Width: 27mm
Mounting distance from center to center: 36 mm
Cable length: approx. 410 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
PART NUMBERS):
30300-KJ9-005
30300-KN7-671
30300-KM1-014
VEHICLE MODELS EQUIPMENT:
Suitable for Honda CH125 Elite 1984
Suitable for Honda CH125 Spacy 1984-1996
Suitable for Honda CH150 Elite 1985-1987
Suitable for Honda CH150 Elite Deluxe 1985-1986
Suitable for Honda CH250 Elite 1985-1988
Suitable for Honda CN250 Helix 1986–1987/1992–2001/2004–2007
Suitable for Piaggio HAXAGON GT-GTX 250 1998-2000
DELIVERY CONTENTS:
1x Pulsar coil
NOTE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
