Description
Pick-up Pulsar/pulse sensor fit for Daytona/Street Triple 675 R 2006-2020
Features:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pick-up pulse coil
Mass:
Height: 19mm
Length: 23mm
Width: 20mm
Mounting bracket center to center: 36 mm
Other specifications:
Number of wires: 2
Equipment:
Fits Daytona 675 ABS 2013-2014
Fits Daytona 675R 2011-2012
Suitable for Daytona 675 (VIN381274) 2006-2020
Suitable for Daytona 675 FIN381275 to FIN564947) 2006-2020
Suitable for Daytona 675 SE 2008-2011
Suitable for Street Triple 675 (FIN 560476) 2008-2017
Suitable for Street Triple 675R (VIN560476) 2009-2017
Package contents:
1x Pick-up pulsar coil
(Compatibility table is for reference only!!!)
(Please compare your faulty device with the image we have provided to determine fitments)
A NOTICE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
-Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before starting your vehicle, you must adjust the air gap on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the cables at the connector.
Features:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pick-up pulse coil
Mass:
Height: 19mm
Length: 23mm
Width: 20mm
Mounting bracket center to center: 36 mm
Other specifications:
Number of wires: 2
Equipment:
Fits Daytona 675 ABS 2013-2014
Fits Daytona 675R 2011-2012
Suitable for Daytona 675 (VIN381274) 2006-2020
Suitable for Daytona 675 FIN381275 to FIN564947) 2006-2020
Suitable for Daytona 675 SE 2008-2011
Suitable for Street Triple 675 (FIN 560476) 2008-2017
Suitable for Street Triple 675R (VIN560476) 2009-2017
Package contents:
1x Pick-up pulsar coil
(Compatibility table is for reference only!!!)
(Please compare your faulty device with the image we have provided to determine fitments)
A NOTICE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
-Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before starting your vehicle, you must adjust the air gap on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the cables at the connector.
