Stator Pulse Pickup Coil for Polaris Worker Magnum Sportsman 335 400 500 95-04

Pick-up Pulsar/Pulsing Coil Fit for Polaris 3085360 3089254 3084974

CHARACTERISTICS:
Brand new pickup/impulse coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil

Mass:
Height: 25 mm
Length: 18 mm
Width: 22mm
Mounting distance from center to center: 35 mm

Other Information:
Number of wires: 2

PART NUMBERS):
3089254
3084974
3085360
3085561
3086238
3086821
3086860
3086984
3087168
31100-KA5-761
31120-KA3-742
31120-KA3-761
31120-KA4-741
31120-KA4-761
31120-KA5-741
32150-05D00
32160-27C00
32160-37E00

FITMENT:
Suitable for Polaris ATP 500 2004
Suitable for Polaris Big Boss 500 1998-1999
Suitable for Polaris International Big Boss 500 1999-2002
Suitable for Polaris Magnum 425 2x4 1995-1998
Suitable for Polaris Magnum 425 4x4 1995-1998
Suitable for Polaris Magnum 425 6x6 1996-1997
Suitable for Polaris Magnum 500 4x4 2000-2001
Suitable for Polaris Magnum 500 EB 2000
Suitable for Polaris Magnum 500 HDS 2x4 2002
Suitable for Polaris Magnum 500 HDS 4x4 1999-2003
Suitable for Polaris Magnum 500 RMK 2002
Suitable for Polaris Scrambler 500 2x4 2001-2002
Suitable for Polaris Scrambler 500 4x4 1997-2003
Suitable for Polaris Sportsman 335 1999-2000
Suitable for Polaris Sportsman 400 2001-2003
Suitable for Polaris Sportsman 400 4x4 F/C carburetor 2004
Suitable for Polaris Sportsman 500 4x4 1996-2004
Suitable for Polaris Sportsman 500 6x6 2001-2002
Suitable for Polaris Sportsman 500 HO 2001-2004
Suitable for Polaris Worker 335 1999
Suitable for Polaris Worker 500 1999/2001-2002
Suitable for Polaris Xpedition 425 2000-2002
Suitable for Polaris Explorer 500 1997

Suitable for Suzuki RM125 1989-2001
Suitable for Suzuki RM250 1986-2001

Suitable for Honda CR125R 1984-1985
Suitable for Honda CR250R 1984-1985
Suitable for Honda CR500R 1984-1986

DELIVERY CONTENTS:
1x Pulsar coil

OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the cables of your OEM wiring harness using a small soldering iron.
- Insulate your solder joints with heat shrink tubing.
- Before attempting to start your vehicle, you may need to adjust the air gap on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or an irregular spark, switch the wires at the plug.