Description
Features:
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
Highest quality lamination materials.
Windings made of the highest quality copper, resistant up to 200 degrees Celsius.
Pick-up pulsar coil included.
Plug included.
All shipped products are tested.
Special features:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Generator stator coil
Dimensions:
Inner diameter: 29 mm/1.14 inches
Outer diameter: 84 mm/3.31 inches
Rod thickness: 28.1 mm/1.10 inches
Rod width: 21.4 mm/0.84 inches
Other specifications:
Number of wires: 6
Number of pens: 6
Number of plugs: 3
Number of mounting holes: 2
Number of poles: 8
PART NUMBERS):
55139004000
55139004100
Equipment:
Suitable for 125 XCW 2017–2018
Suitable for 150 XCW 2017-2019
Suitable for 200 XCW 2008–2016
Suitable for 200 EXC 2013-2016
Suitable for 250 XC 2008-2016
Suitable for 250 XCW 2008-2016
Suitable for 250 XC USA AND EU MIX 2008–2016
Suitable for 250R Freeride 2014-2017
Suitable for 250 EXC 2008-2016
Suitable for 250 EXC SIX DAYS 2008-2016
Suitable for 250 EXC FACTORY 2011/2015
Suitable for 250 EXC FACTORY EDITION 2011/2015
Suitable for 300 2009-2016
Suitable for 300 XC 2008-2016
Suitable for 300 XCW 2008-2016
Suitable for 300 XCW SIX DAYS 2014-2016
Suitable for 300 EXC-E 2007-2008
Suitable for 300 EXC-E SIX DAYS 2008/2010-2011
Suitable for 300 EXC 2009-2016
Suitable for 300 EXC SIX DAYS 2009/2012-2016
Suitable for 300 EXC FACTORY EDITION 2011/2015
Suitable for Husqvarna TC 250 2014
Suitable for Husqvarna TX125 2017-2018
Suitable for Husqvarna TE150 2017-2018
Suitable for Husqvarna TE250 2011-2016
Suitable for Husqvarna TE300 2011-2016
Suitable for Husaberg TE250 2011-2013
Suitable for Husaberg TE300 2012-2013
Package:
1x Generator stator coil
Note:
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.
All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
