Stator generator alternator for Kawasaki KDX 200 EH 89 - 06/KDX 220 R 94 - 05 Generic

Features:
High-quality ignition stator coil that works with many ATC tricycles.
A simple solution for replacing the ignition coil on the stator plate.
Requires soldering two wire leads to the tabs of this new coil.
It is a very cost-effective solution for repairing an otherwise very expensive OEM stator plate.
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
All shipped products are tested.
NOT with base.

Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Generator stator coil

Part number:
21003-1192
21003-1279

Equipment:
Suitable for Kawasaki KDX200-E1 1989
Suitable for Kawasaki KDX200-E2 1990
Suitable for Kawasaki KDX200-E3 1991
Suitable for Kawasaki KDX200-E4 1992
Suitable for Kawasaki KDX200-E5 1993
Suitable for Kawasaki KDX200-E6 1994
Suitable for Kawasaki KDX200-H1 1995
Suitable for Kawasaki KDX200-H2 1996
Suitable for Kawasaki KDX200-H3 1997
Suitable for Kawasaki KDX200-H4 1998
Suitable for Kawasaki KDX200-H5 1999
Suitable for Kawasaki KDX200-H6 2000
Suitable for Kawasaki KDX200-H7 2001
Suitable for Kawasaki KDX200-H8 2002
Suitable for Kawasaki KDX200-H9 2003
Suitable for Kawasaki KDX200-H10 2004
Suitable for Kawasaki KDX200-H11 2005
Suitable for Kawasaki KDX200H6F 2006
Suitable for Kawasaki KDX220-A1 1994
Suitable for Kawasaki KDX220-A2 1995
Suitable for Kawasaki KDX220-A4 1997
Suitable for Kawasaki KDX220-A5 1998
Suitable for Kawasaki KDX220-A6 1999
Suitable for Kawasaki KDX220-A7 2000
Suitable for Kawasaki KDX220-A8 2001
Suitable for Kawasaki KDX220-A9 2002
Suitable for Kawasaki KDX220-A10 2003
Suitable for Kawasaki KDX220-A11 2004
Suitable for Kawasaki KDX220-A12 2005

Package contents:
1x Primary Ignition Coil Kit

NOTE:
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.
All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.