Description
18-pole generator stator suitable for Benelli 502C Leoncino 500 TRK502/X 2017-2025
Features:
Direct replacement for your original device
Highest quality laminating materials.
Connection cable included.
Rubber grommet included.
All shipped products are tested.
Specifications:
Condition: Used part, 100% new
Type: Stator coil
Further specifications:
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of mounting holes: 3
Number of masts: 18
Please compare the number of pins and connectors with the old part before purchasing.
Part number:
299036280000
R320434143000
299036280030
(Always compare the part numbers with the part drawings and make appropriate cross-references.)
(This is NOT an original part. The OEM part numbers are used for product identification and comparison purposes only.)
Suitable for make/model/year:
299036280000
R320434143000
Suitable for Benelli 302S 4T 2017-2025
Suitable for Benelli 502C 4T Euro 4 2019-2020
Suitable for Benelli BN 302 4T Euro 3 2014-2016
Suitable for Benelli BN 302 ABS 4T Euro 4 2018-2020
Suitable for Benelli TNT 249 S 4T
Suitable for Benelli TNT 300 4T
Suitable for Benelli Leoncino 500 4T 2017–2020
Suitable for Benelli TRK502 4T 2017-2020
Suitable for Benelli TRK502X 4T 2017-2020
Suitable for QJMotor SRK250 4T 2024-2025
Suitable for QJMotor SRK250 RR 4T 2024-2025
299036280030
Suitable for Benelli 502C 4T Euro 5 2021-2025
Suitable for Benelli Leoncino 500 4T 2021–2025
Suitable for Benelli Leoncino 500 Trail 4T 2021–2025
Suitable for Benelli TRK 502 4T Euro 5 2021-2025
Suitable for Benelli TRK 502 X 4T Euro 5 2021-2025
Suitable for Benelli Tornado 550 4T 2025–2026
Suitable for QJMotor SRT550 4T 2024-2026
Please check and confirm before purchasing whether the number of stator poles matches ours and whether your connectors and wiring harness match the one shown in the photo.
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we have provided to check compatibility.)
Package contents:
1x Stator generator
OBSERVE:
Before you install your new stator
Check the AC output of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any burnt-out cables.
Use high-temperature resistant dielectric grease on all connectors.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Threadlocker must always be used when screwing on the stator.
If our stator contains a pickup coil, be sure to pay attention to the correct air gap during installation.
All images of the items are correct; if in doubt, please do not hesitate to compare our item with your original part.
The battery's condition is important. No stator can compensate for a weak or defective battery. If in doubt, charge your battery and have it subjected to a load test, or simply replace it.
ALWAYS start with a FULLY CHARGED BATTERY!
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is only given to identify the product offered as an accessory or spare part, in order to clarify for which vehicle the offered product is suitable.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert online service: We solve your installation and product problems.
