Description
Feature:
1. A new pair of headlights from us allows you to clearly see the road ahead at night and in any bad weather.
which may arise.
2. Gives you and your family safer night driving.
3. Makes your car look newer.
4. You will be able to see road markings and traffic signs better.
5. Driving at night can be a scary experience – and it's even more scary when you can't see the road well.
6. A dark, cloudy, yellowed, or otherwise damaged or malfunctioning headlight makes driving dangerous, not only for your own safety.
Security is at risk, but so is the security of others.
7. Great replacement or upgrade for factory headlights
8. Adjustment screws for high/low beam
Special features:
Condition: 100% brand new
Color: as you choose
Material: Plastic housing/Polycarbonate lens
Equipment type: Direct replacement
Placement on the vehicle: front, left, right
Manufacturer part number: GM2502283, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Replacement part numbers: 22853029, 25799193, 22853030, 25799194
Other part numbers: 22853029, 25799193, 22853030, 25799194
Mounting type: Composite material
Case color: your choice
Lens color: how you choose
Lighting technology: Halogen
Equipment:
For GMC Sierra 1500 2007-2013
For GMC Sierra 2500 HD 2007-2014
For GMC Sierra 3500 HD 2007-2014
Package includes:
1 pair of headlights (driver and passenger side)
Note:
1. Please check before purchasing whether this item fits your car.
2. Before you begin adjusting the lights, first check their alignment. Park the vehicle approximately 10 to 25 feet away from the wall, with the lights pointed towards the wall. The center lines of the headlights should be no more than 3.5 feet above the ground.
TIPS:
2. Installation:
1. Loosen the screws, clips, or retaining springs that secure the headlight.
2. Disconnect the wiring from the assembly.
3. Remove the headlight from the vehicle to replace it with a new one.
4. Install the new headlight assembly.
5. Attach the new headlight, making sure that the screws, clips or retaining springs used are tight.
6. Reconnect the cables that were disconnected from the assembly.
7. Reattach the grille and any other components you removed. Reseal them in place.
8. Test the new assembly.
2. Setting:
Before you begin adjusting the lights, first check their alignment. Park the vehicle approximately 10 to 25 feet away.
from the wall with the lights directed at the wall. The center lines of the spotlights should not be higher than 3.5 feet.
the ground.
1. Locate the adjustment screws. First, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted individually. Place a rag or towel on the headlights.
Place the light fixture over a chair in front of the light you wish to block. Directly covering the light fixture can damage the plastic lens.
3. Adjust the vertical position. The screw on the top of the light fixture should be turned clockwise to raise the light.
Turning the headlight upwards and counterclockwise lowers the light. The headlight should be adjusted to the upper edge of its most intense part.
The beam of light shines directly on or just below the center of the band line on the wall.
4. Test your results
1.Attitude:
Condensation inside a headlight unit is normal and can occur for various reasons. Condensation does not necessarily mean
that a headlight assembly is defective, after hot, pressurized air escaped from the headlight through the ventilation openings, moisture
Moisture can seep in from the outside. For example, headlights that have been switched on for hours of driving can fog up on the inside because...
Its cool temperature creates a low-pressure area that actually attracts moisture. To minimize condensation inside...
Headlights: make sure all dust boots or covers are securely in place. Also, ensure that the headlight openings are not blocked, which could be the case.
prevent condensation from escaping.
If water accumulates in your headlight to the point where puddles form, you probably have a crack in the headlight lens cover.
Water can also penetrate due to improper seals around the dust boots into which the light bulbs are inserted. If no cracks or holes are visible around the perimeter...
The problem with the edges of the headlight could be with the housing itself. If you find a visible crack, it's best to repair it with sealant.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems