Description
12V Motorcycle Heated Grips Cover Handlebar Warm Heater Heat Shrink Tubing
Product benefits:
1. It heats up faster and receives more evenly; it is also effectively water and moisture resistant.
2. The product features independent switch control, and the switch has an integrated intelligent temperature control chip with three temperature setting levels, making the intelligent temperature control more convenient.
3. The product heats up quickly, in 10 seconds, and the heating surface is large.
4. The product heating plate can be glued and attached directly to the handlebars and is convenient and quick to install.
5. IP67 water resistance means that even if the switch and handle cover are submerged in water, they will function normally. If the handle cover needs cleaning, simply unplug it and wash it with water – very convenient.
6. The pattern on the cover uses a silicone printing process, which offers better slip resistance. The offset-printed logo is more fashionable and looks cooler after installation.
Features:
Material: Composite fiber heating wire (L-bracket) stainless steel
Net weight: 133g
Input voltage: DC12V
Cable length: 105 cm (heating foil to switch) 142 cm (switch to electric door lock)
Operating temperature: -30°C to 100°C
Power consumption: High-end 25 W, mid-range 20 W, low-end 15 W
Product accessories: 3M adhesive*1, cable ties*5, stainless steel L-bracket*1
Installation method: Gluing and fastening with 3M adhesive, attaching the L-angle lens holder.
Wiring method: Connect the product's red wire to the positive terminal of the power supply and connect the product's black wire to the negative terminal of the power supply (the lamp will not light up if connected in reverse, it will only generate heat).
Operating instructions: Switching on: The red light, blue light and green light each flash once and then go out.
Standby: The red light flashes during breathing; when the temperature reaches the relative temperature, it automatically turns blue.
Operating status: Indicator light is always on (High-end: red light is always on, mid-range: blue light is always on, low-end: green light is always on)
Click the button: Change gear
Note: The positive and negative poles are connected in reverse; the switch cannot be used and the heating element will heat up directly.
[A notice]:
1. Please select the appropriate gear according to the ambient temperature. If, at low temperatures, the temperature of the electric heated grip cover cannot be detected in time due to hand numbness, please use the low or medium setting first to avoid burns from high temperatures.
2. This product is only suitable for motorcycles with a 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will damage the components.
3. This product can only be mounted on the handlebars of motorcycles while powered. You can use a battery to test whether the product is receiving power before installation.
4. It is strictly forbidden to apply power and operate the system when not in use (idle operation) to prevent overheating of the electric handlebar cover and damage to the original handlebars.
5. It is recommended to connect the electric door lock cable to the wiring. Most models have a black positive terminal and a green negative terminal.Under certain conditions, it is recommended to use a multimeter for measurement.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert support: We solve your installation and product problems.
Product benefits:
1. It heats up faster and receives more evenly; it is also effectively water and moisture resistant.
2. The product features independent switch control, and the switch has an integrated intelligent temperature control chip with three temperature setting levels, making the intelligent temperature control more convenient.
3. The product heats up quickly, in 10 seconds, and the heating surface is large.
4. The product heating plate can be glued and attached directly to the handlebars and is convenient and quick to install.
5. IP67 water resistance means that even if the switch and handle cover are submerged in water, they will function normally. If the handle cover needs cleaning, simply unplug it and wash it with water – very convenient.
6. The pattern on the cover uses a silicone printing process, which offers better slip resistance. The offset-printed logo is more fashionable and looks cooler after installation.
Features:
Material: Composite fiber heating wire (L-bracket) stainless steel
Net weight: 133g
Input voltage: DC12V
Cable length: 105 cm (heating foil to switch) 142 cm (switch to electric door lock)
Operating temperature: -30°C to 100°C
Power consumption: High-end 25 W, mid-range 20 W, low-end 15 W
Product accessories: 3M adhesive*1, cable ties*5, stainless steel L-bracket*1
Installation method: Gluing and fastening with 3M adhesive, attaching the L-angle lens holder.
Wiring method: Connect the product's red wire to the positive terminal of the power supply and connect the product's black wire to the negative terminal of the power supply (the lamp will not light up if connected in reverse, it will only generate heat).
Operating instructions: Switching on: The red light, blue light and green light each flash once and then go out.
Standby: The red light flashes during breathing; when the temperature reaches the relative temperature, it automatically turns blue.
Operating status: Indicator light is always on (High-end: red light is always on, mid-range: blue light is always on, low-end: green light is always on)
Click the button: Change gear
Note: The positive and negative poles are connected in reverse; the switch cannot be used and the heating element will heat up directly.
[A notice]:
1. Please select the appropriate gear according to the ambient temperature. If, at low temperatures, the temperature of the electric heated grip cover cannot be detected in time due to hand numbness, please use the low or medium setting first to avoid burns from high temperatures.
2. This product is only suitable for motorcycles with a 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will damage the components.
3. This product can only be mounted on the handlebars of motorcycles while powered. You can use a battery to test whether the product is receiving power before installation.
4. It is strictly forbidden to apply power and operate the system when not in use (idle operation) to prevent overheating of the electric handlebar cover and damage to the original handlebars.
5. It is recommended to connect the electric door lock cable to the wiring. Most models have a black positive terminal and a green negative terminal.Under certain conditions, it is recommended to use a multimeter for measurement.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert support: We solve your installation and product problems.