Description
Refurbished F192040 Printhead Compatible with TX800 DX8 DX10 TX700 TX710 TX720 TX810 TX820 A700 A800 Eco-Solvent UV Inkhead
Feature:
Excellent performance and high quality.
Made from high-quality material, durable, firm and stable for us.
This is a cleaned, thoroughly tested and sealed printhead.
Good stability, long service life.
Full color function.
This is an aftermarket replacement part, but not an original.
DESIGNATION:
Please confirm the faulty part of your printer before deciding to replace a printhead.
If the printhead cannot print colors, please remove the printhead from your printer and touch the nozzle of the printhead with a white cloth.
If the ink is printed on the tissues, it does not necessarily mean that the printhead is at fault, and you need to continue troubleshooting.
The printhead is cleaned and tested and may contain a protective solution and moisture, but this does not affect its use.
Compatible models:
Suitable for F192040 DX8 DX10 TX800 TX700 TX710 TX720 TX810 TX820 A700 A800 printers
Package includes:
1 x printhead
Note:
1. Please switch off the printer after entering a print value, otherwise the mainboard chip will burn out.
After inserting the printhead, please do not install a ribbon on more than 10 A4 documents.
This allows the new needle to break in, and then insert the ribbon. I hope you can operate carefully.
2. If the original printhead was broken and ink leaked out, the mainboard may have burned out.
Therefore, please resolve the mainboard issue before replacing the printhead. Additionally,
The ignition cable F1, F2 of the mainboard can only be replaced by the original ignition unit, which has the same current rating and model.
If the detonator is replaced with one that has a higher current value and a different model, both the printhead and the mainboard may be damaged.
3. The printhead requires careful attention. It is easy to cause damage if a layperson replaces the printhead blindly.
There is a regulation stating that the printhead has no warranty and is delicate and expensive.
Please do not attempt to start up the machine and please handle it with care.
4. If you are not familiar with the device, it is recommended that you send the printhead to a repair station.
Or have the nozzle replaced by professionals to avoid unnecessary losses and hassle.
Feature:
Excellent performance and high quality.
Made from high-quality material, durable, firm and stable for us.
This is a cleaned, thoroughly tested and sealed printhead.
Good stability, long service life.
Full color function.
This is an aftermarket replacement part, but not an original.
DESIGNATION:
Please confirm the faulty part of your printer before deciding to replace a printhead.
If the printhead cannot print colors, please remove the printhead from your printer and touch the nozzle of the printhead with a white cloth.
If the ink is printed on the tissues, it does not necessarily mean that the printhead is at fault, and you need to continue troubleshooting.
The printhead is cleaned and tested and may contain a protective solution and moisture, but this does not affect its use.
Compatible models:
Suitable for F192040 DX8 DX10 TX800 TX700 TX710 TX720 TX810 TX820 A700 A800 printers
Package includes:
1 x printhead
Note:
1. Please switch off the printer after entering a print value, otherwise the mainboard chip will burn out.
After inserting the printhead, please do not install a ribbon on more than 10 A4 documents.
This allows the new needle to break in, and then insert the ribbon. I hope you can operate carefully.
2. If the original printhead was broken and ink leaked out, the mainboard may have burned out.
Therefore, please resolve the mainboard issue before replacing the printhead. Additionally,
The ignition cable F1, F2 of the mainboard can only be replaced by the original ignition unit, which has the same current rating and model.
If the detonator is replaced with one that has a higher current value and a different model, both the printhead and the mainboard may be damaged.
3. The printhead requires careful attention. It is easy to cause damage if a layperson replaces the printhead blindly.
There is a regulation stating that the printhead has no warranty and is delicate and expensive.
Please do not attempt to start up the machine and please handle it with care.
4. If you are not familiar with the device, it is recommended that you send the printhead to a repair station.
Or have the nozzle replaced by professionals to avoid unnecessary losses and hassle.