Description
Features:
1. Excellent performance and high quality.
2. Made of high-quality material, durable, sturdy and stable for our use.
3. This is a cleaned, thoroughly tested and sealed printhead.
4. Good stability, long service life.
5. Replacement printhead for Kodak 10 series ESP 3 5 7 9 5100 5300 5500 3250 5250 6150 7250.
6. Full color function.
Special features:
Item type: Printhead
Material: Plastic
Size: 11 x 8 x 6 cm/4.3 x 3.1 x 2.3 inches
Suitable for the following models:
For Kodak EASYSHARE 5100
For Kodak EASYSHARE 5300
For Kodak EASYSHARE 5500
For Kodak ESP3
For Kodak ESP 3250
For Kodak ESP5
For Kodak ESP 5210
For Kodak ESP 5250
For Kodak ESP 6150
For Kodak ESP7
For Kodak ESP 9
For Kodak ESP 9250
For Kodak ESP Office 6150
Package contents:
1 x printhead
Note:
1. Please switch off the printer after entering a print value, otherwise the mainboard chip will burn out.
After inserting the printhead, please do not install a ribbon on more than 10 A4 documents.
This allows the new needle to break in, and then insert the ribbon. I hope you can operate carefully.
2. If the original printhead was broken and, in particular, ink leaked out, the mainboard may have burned out.
Therefore, please resolve the mainboard issue before replacing the printhead. Additionally,
The ignition cable F1, F2 of the mainboard can only be replaced by the original ignition unit, which has the same current rating and model.
If the detonator is replaced with one that has a higher current value and a different model, both the printhead and the mainboard may be damaged.
3. The printhead requires careful attention. It is easy to cause damage if a layperson replaces the printhead blindly.
There is a regulation stating that the printhead has no warranty and is delicate and expensive.
Please do not attempt to start up the machine and please handle it with care.
4. If you are not familiar with the device, it is recommended that you send the printhead to a repair station.
or find professionals to replace the nozzle to avoid unnecessary losses and hassle.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
1. Excellent performance and high quality.
2. Made of high-quality material, durable, sturdy and stable for our use.
3. This is a cleaned, thoroughly tested and sealed printhead.
4. Good stability, long service life.
5. Replacement printhead for Kodak 10 series ESP 3 5 7 9 5100 5300 5500 3250 5250 6150 7250.
6. Full color function.
Special features:
Item type: Printhead
Material: Plastic
Size: 11 x 8 x 6 cm/4.3 x 3.1 x 2.3 inches
Suitable for the following models:
For Kodak EASYSHARE 5100
For Kodak EASYSHARE 5300
For Kodak EASYSHARE 5500
For Kodak ESP3
For Kodak ESP 3250
For Kodak ESP5
For Kodak ESP 5210
For Kodak ESP 5250
For Kodak ESP 6150
For Kodak ESP7
For Kodak ESP 9
For Kodak ESP 9250
For Kodak ESP Office 6150
Package contents:
1 x printhead
1. Please switch off the printer after entering a print value, otherwise the mainboard chip will burn out.
After inserting the printhead, please do not install a ribbon on more than 10 A4 documents.
This allows the new needle to break in, and then insert the ribbon. I hope you can operate carefully.
2. If the original printhead was broken and, in particular, ink leaked out, the mainboard may have burned out.
Therefore, please resolve the mainboard issue before replacing the printhead. Additionally,
The ignition cable F1, F2 of the mainboard can only be replaced by the original ignition unit, which has the same current rating and model.
If the detonator is replaced with one that has a higher current value and a different model, both the printhead and the mainboard may be damaged.
3. The printhead requires careful attention. It is easy to cause damage if a layperson replaces the printhead blindly.
There is a regulation stating that the printhead has no warranty and is delicate and expensive.
Please do not attempt to start up the machine and please handle it with care.
4. If you are not familiar with the device, it is recommended that you send the printhead to a repair station.
or find professionals to replace the nozzle to avoid unnecessary losses and hassle.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
