Printhead suitable for Epson XP600/XP601/XP950/XP820 FA09050 full colors

feature :
Excellent performance and high quality.
Made from high-quality material, durable, firm and stable for us.
This is a cleaned, thoroughly tested and sealed printhead.
Good stability, long service life.
Full color function.
This is an aftermarket replacement part.

Descriptions :
Please confirm the faulty part of your printer before deciding to replace a printhead.
If the printhead cannot print colors, please remove the printhead from your printer and touch the nozzle of the printhead with a white cloth.
If the ink is printed on the tissues, it does not necessarily mean that the printhead is at fault, and you need to continue troubleshooting.
The printhead is cleaned and tested and may contain a protective solution and moisture, but this does not affect its use.

Compatible models:
Compatible models: Fits XP600 printhead. Compatible with EPS XP600 XP601 XP510 XP610 XP620 XP625 XP630 XP635 XP950 XP850 XP800 XP700 XP720 XP721 XP810 XP1000 XP701 XP950 XP820 XP850 XP821.

Package includes:
1 x printhead

Note:
1. Please switch off the printer after entering a print value, otherwise the mainboard chip will burn out.
After inserting the printhead, please do not install a ribbon on more than 10 A4 documents.
This allows the new needle to break in, and then insert the ribbon. I hope you can operate carefully.

2. If the original printhead was broken and, in particular, ink leaked out, the mainboard may have burned out.
Therefore, please resolve the mainboard issue before replacing the printhead. Additionally,
The ignition cable F1, F2 of the mainboard can only be replaced by the original ignition unit, which has the same current rating and model.
If the detonator is replaced with one that has a higher current value and a different model, both the printhead and the mainboard may be damaged.

3. The printhead requires careful attention. It is easy to cause damage if a layperson replaces the printhead blindly.
There is a regulation stating that the printhead has no warranty and is delicate and expensive.
Please do not attempt to start up the machine and please handle it with care.

4. If you are not familiar with the device, it is recommended that you send the printhead to a repair station.
Or have the nozzle replaced by professionals to avoid unnecessary losses and hassle.