Description
FEATURES:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 17.6 mm
Length: 26mm
Width: 22 mm
Mounting distance from center to center: 33.7 mm
Other specifications:
Number of wires: 2
PART NUMBERS):
4011799
FURNISHINGS:
Suitable for Polaris Outlaw 450 "S" 2008/2010
Suitable for Polaris Outlaw 450 MXR 2009
Suitable for Polaris Outlaw 525 2007
Suitable for Polaris Outlaw 525 "S" 2008-2010
Suitable for Polaris Outlaw 525 2X4 IRS 2010
Suitable for Polaris Outlaw 525 IRS 2008
Suitable for Polaris Outlaw 525 IRS 2009
Suitable for Polaris Outlaw 525 IRS 2011
DELIVERY CONTENTS:
1x Pulsar coil
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we have provided to aid in your decision-making.)
A NOTICE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
