Description
Motor speed controller PWM DC 12V 24V 60V 500W Adjustable speed controller
Special feature:
1: By using two original low-resistance high-voltage MOS transistors as well as a driver, improved performance and more stable support for high voltage and high power.
2: The duty cycle, the upper and lower limits of the duty cycle and the operating frequency can be adjusted, which is convenient for customers to operate and use the motor according to its working characteristics.
3: The digital encoder knob adjusts the motor speed, which is more accurate and consistent than with conventional potentiometers.
4: Motor soft-start function. When the motor starts, the current increases slowly and no surge current occurs, which can effectively protect the motor and extend its service life.
5: Equipped with a start-stop button that can be controlled by an external switch to meet various customer control requirements.
(Note: The external switch should use a self-resetting button or a push button; press to open and then press again to close; the function to open the output when normally open cannot be implemented, and the function to close the output when not normally open is not possible.)
6: Standard 5135 instrument housing, convenient for customers to install.
Special features:
Condition: 100% brand new
Operating voltage: DC 9V-60V
Rated current: 12A
Peak current: 20A
Power: 500W (max.)
Operating frequency: 1 kHz–99 kHz
Frequency accuracy: 1%
Frequency resolution: 1 kHz
Duty cycle: 0%-100%
Duty cycle resolution: 1%
Operating temperature: -40~85°C
Operating humidity: 0%-95% RH
Size: 79 * 43 * 26 mm/3.11 * 1.69 * 1.02 inches
Operation of the digital encoder knob:
1. In the standard interface: (the duty cycle is displayed by default)
Short press: Toggle engine start and stop
Press and hold for 10 seconds to access the settings interface.
Counterclockwise rotation: The duty cycle decreases
Clockwise rotation: increased duty cycle
2. Below the settings screen:
Briefly press: Select setting parameters and switch between ON-OFF, lower duty cycle limit, upper duty cycle limit, and operating frequency. ON-OFF sets the module to its default on-off state. Rotate the encoder to return to the default on-off state. The lower duty cycle limit is displayed as "L" + two digits, and the upper duty cycle limit is displayed as "H" + two digits or "100", and the display format of the operating frequency is "F" + two digits .
Long press (2 seconds): Exit the settings interface
Counterclockwise rotation: the corresponding settings are reduced.
Clockwise rotation: the setting parameters increase accordingly.
Note:
1. Please allow 1-3 mm difference due to manual measurement.
2. The item color shown in the photos may differ slightly on your computer monitor, as monitors are not calibrated the same.
3. STOP port on the rear: Can be connected to an external switch button or a 3.3V level. Do not use in complex electromagnetic environments. There is no relevant protection within the circuit. Note that the external switch should use a self-resetting button or push button. Press once to turn it on, and then press again to turn it off. It cannot provide a function of always-open or always-close the output.
Package contents:
1x DC motor speed controller
Special feature:
1: By using two original low-resistance high-voltage MOS transistors as well as a driver, improved performance and more stable support for high voltage and high power.
2: The duty cycle, the upper and lower limits of the duty cycle and the operating frequency can be adjusted, which is convenient for customers to operate and use the motor according to its working characteristics.
3: The digital encoder knob adjusts the motor speed, which is more accurate and consistent than with conventional potentiometers.
4: Motor soft-start function. When the motor starts, the current increases slowly and no surge current occurs, which can effectively protect the motor and extend its service life.
5: Equipped with a start-stop button that can be controlled by an external switch to meet various customer control requirements.
(Note: The external switch should use a self-resetting button or a push button; press to open and then press again to close; the function to open the output when normally open cannot be implemented, and the function to close the output when not normally open is not possible.)
6: Standard 5135 instrument housing, convenient for customers to install.
Special features:
Condition: 100% brand new
Operating voltage: DC 9V-60V
Rated current: 12A
Peak current: 20A
Power: 500W (max.)
Operating frequency: 1 kHz–99 kHz
Frequency accuracy: 1%
Frequency resolution: 1 kHz
Duty cycle: 0%-100%
Duty cycle resolution: 1%
Operating temperature: -40~85°C
Operating humidity: 0%-95% RH
Size: 79 * 43 * 26 mm/3.11 * 1.69 * 1.02 inches
Operation of the digital encoder knob:
1. In the standard interface: (the duty cycle is displayed by default)
Short press: Toggle engine start and stop
Press and hold for 10 seconds to access the settings interface.
Counterclockwise rotation: The duty cycle decreases
Clockwise rotation: increased duty cycle
2. Below the settings screen:
Briefly press: Select setting parameters and switch between ON-OFF, lower duty cycle limit, upper duty cycle limit, and operating frequency. ON-OFF sets the module to its default on-off state. Rotate the encoder to return to the default on-off state. The lower duty cycle limit is displayed as "L" + two digits, and the upper duty cycle limit is displayed as "H" + two digits or "100", and the display format of the operating frequency is "F" + two digits .
Long press (2 seconds): Exit the settings interface
Counterclockwise rotation: the corresponding settings are reduced.
Clockwise rotation: the setting parameters increase accordingly.
Note:
1. Please allow 1-3 mm difference due to manual measurement.
2. The item color shown in the photos may differ slightly on your computer monitor, as monitors are not calibrated the same.
3. STOP port on the rear: Can be connected to an external switch button or a 3.3V level. Do not use in complex electromagnetic environments. There is no relevant protection within the circuit. Note that the external switch should use a self-resetting button or push button. Press once to turn it on, and then press again to turn it off. It cannot provide a function of always-open or always-close the output.
Package contents:
1x DC motor speed controller