Description
Pulsar pickup coil compatible with Hyosung GV250 GT250R GT250 GT125R GT125 GV125 GT650R GV650 GT650X
CHARACTERISTICS:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All delivered products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 piece
Type: Pick up pulse coil
Mass:
Height: 19mm
Length: 28 mm
Width: 23mm
Mounting distance from center to center: 29 mm
Other specifications:
Number of wires: 2
VEHICLE MODELS
Suitable for Hyosung GV250 2006-2011
Suitable for Hyosung GT250R 2006-2008
Suitable for Hyosung GT250 2006-2009
Suitable for Hyosung GT125R 2002-2010
Suitable for Hyosung GT125 2002-2010
Suitable for Hyosung GV125 2002-2010
Suitable for Hyosung GT650R GT650 2005-2017
Suitable for Hyosung ST7 Carb 2010-2016
Suitable for Hyosung GV650 Carb 2005-2009/2012-2017
Suitable for Hyosung GT650X Special Edition 2008
Suitable for United Motor V2S 650 2006-2008
Suitable for United Motor V2C 650R 2006-2008
Suitable for ATK GT650R carburetors 2011-2012
Suitable for ATK GV650 carburetors 2010-2012
DELIVERY CONTENTS:
1x pulse coil
OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or arcing, swap the wires at the connector.
CHARACTERISTICS:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All delivered products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 piece
Type: Pick up pulse coil
Mass:
Height: 19mm
Length: 28 mm
Width: 23mm
Mounting distance from center to center: 29 mm
Other specifications:
Number of wires: 2
VEHICLE MODELS
Suitable for Hyosung GV250 2006-2011
Suitable for Hyosung GT250R 2006-2008
Suitable for Hyosung GT250 2006-2009
Suitable for Hyosung GT125R 2002-2010
Suitable for Hyosung GT125 2002-2010
Suitable for Hyosung GV125 2002-2010
Suitable for Hyosung GT650R GT650 2005-2017
Suitable for Hyosung ST7 Carb 2010-2016
Suitable for Hyosung GV650 Carb 2005-2009/2012-2017
Suitable for Hyosung GT650X Special Edition 2008
Suitable for United Motor V2S 650 2006-2008
Suitable for United Motor V2C 650R 2006-2008
Suitable for ATK GT650R carburetors 2011-2012
Suitable for ATK GV650 carburetors 2010-2012
DELIVERY CONTENTS:
1x pulse coil
OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or arcing, swap the wires at the connector.
