STATOR GENERATOR for Husqvarna FC 250 FC350 FC 450 FS 450 FX350 FX 450 2015-2019 Generic

FEATURES:
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
Highest quality lamination materials.
Windings made of the highest quality copper, resistant up to 200 degrees Celsius.
Pick-up pulsar coil included.
Plug included.
All shipped products are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Generator stator coil

Dimensions:
Inner diameter: 31.9 mm/1.25 inches
Outer diameter: 76.7 mm/3.01 inches
Rod thickness: 26.5 mm/1.04 inches
Rod width: 13.4 mm/0.53 inches

Other specifications:
Number of wires: 4
Number of pens: 4
Number of plugs: 3
Number of mounting holes: 3
Number of poles: 12

PART NUMBERS):
79239004000
79239004100

FURNISHINGS:
Suitable for Husqvarna 79239004000
Suitable for Husqvarna FC250 2015-2019
Suitable for Husqvarna FC350 2015-2018
Suitable for Husqvarna FC450 2016-2019
Suitable for Husqvarna FC450 ROCKSTAR EDITION 2019
Suitable for Husqvarna FS450 2016-2019
Suitable for Husqvarna FX350 2017-2019
Suitable for Husqvarna FX450 2017/2019

Suitable for KTM 79239004000
Suitable for KTM 79239004100
Suitable for KTM SX-F 250 2016-2019
Suitable for KTM SX-F 250 Factory Edition 2015-2016
Suitable for KTM XC-F 250 2016-2019
Suitable for KTM SX-F 350 2016-2019
Suitable for KTM SX-F 450 2016-2019
Suitable for KTM SX-F 450 FACTORY EDITION 2015-2019
Suitable for KTM XC-F 450 2016-2019

DELIVERY CONTENTS:
1x Generator stator coil

NOTE:
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.
All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.