Light coil suitable for Yamaha 9.9/13.5/15 HP outboard engine 1995-2017 63V-85533-00-00 Generic

Features:
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
Highest quality lamination materials.
Windings made of the highest quality copper, resistant up to 200 degrees Celsius.
Plug included.
All shipped products are tested.

Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Lighting coil

Part number:
63V-85533-00

Equipment:
Suitable for Yamaha 9.9HP E9.9D MHS/L 2003
Suitable for Yamaha 9.9 HP 9.9 MS/LH 1996-2010
Suitable for Yamaha 9.9 HP 9.9 ES/LH 1996-1997
Suitable for Yamaha 9.9HP 9.9F MHS 2010-2017
Suitable for Yamaha 9.9HP 9.9F MHL 2011-2014
Suitable for Yamaha 9.9HP 9.9F MHS/L 1998-2013
Fits Yamaha 9.9HP 9.9F WHS/L 2000-2001
Suitable for Yamaha 9.9HP 9.9F MHS/L (VMAX) 2003
Suitable for Yamaha 9.9HP 9.9F (E)MHS/L 1996-1999
Suitable for Yamaha 13.5 HP 135 A MHS/L 2002-2003
Suitable for Yamaha 15HP EK15N MHS/L 2003
Suitable for Yamaha 15HP E15C MHS/L/XL 2003
Suitable for Yamaha 15HP E15D MHS/L/XL 2003
Suitable for Yamaha 15HP 15 ES/LH 1996
Suitable for Yamaha 15 HP 15 MSH 2001–2009
Suitable for Yamaha 15 HP 15 MS/LH 1996–2000
Suitable for Yamaha 15HP 15F WCL 2003
Suitable for Yamaha 15HP 15F MHS 2010-2017
Suitable for Yamaha 15HP 15F MHL 2011-2017
Suitable for Yamaha 15HP 15F MHS/L1998-2017
Suitable for Yamaha 15HP 15F MCS/L 2000-2001
Suitable for Yamaha 15HP 15F WHS/L 1995-2000
Suitable for Yamaha 15HP 15F WHS/L/XL 1997-1999
Suitable for Yamaha 15HP 15F WCS/L 1999/2002
Suitable for Yamaha 15HP 15F WCS/L/XL 2000-2005
Suitable for Yamaha 15HP 15F WCS/L/XL 2000-2003
Suitable for Yamaha 15HP E15C MHS/L/XL 2003
Suitable for Yamaha 15HP EK15N MHS/L 2003

Package contents:
1x lighting coil

NOTE:
Before installing your new stator

Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.

All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.