Description
Stator solenoid coil + voltage regulator + sealing assembly for Yamaha XT500 3BJ XT600 2KF 2NK 3PW
Characteristics:
The kit includes stator, regulator-rectifier and gasket.
Meets or exceeds OEM quality, direct replacement for your original part.
Perfect fit and ready to install.
Always use sealant to secure the cable gland.
Instructions are NOT included.
Danger:
One of the most common reasons for stator failure is a defective regulator, which burns out the stator in a very short time.
Therefore, we strongly recommend that you replace both parts.
Technically modified stators are non-returnable.
Specifications:
Condition: Aftermarket 100% brand new
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 7
Number of plugs: 4
Number of pens: 1 + 1 + 3 + 2
Number of mounting holes: 4
Number of poles: 12
Outer diameter: 115 mm
Inner diameter: 54 mm
Pickup pulsar coil included.
regulator
Number of plugs: 1
Number of pens: 4
Pen assignment:
Power coil
Power coil
Power coil
Battery (+)
Chassis – GND
Please compare the number of pins and connectors with the old part before purchasing.
Part number:
Stator assembly: 1JK-85510-50, 1JK-85510-51, 34L-81410-51
Rectifier, regulator: 1JK-81960-A0, 1JK-81960-A1
Gasket, generator cover: 5Y1-15451-01, 3SW-15451-00
(Always compare the part numbers with your parts diagrams and make appropriate cross-references.)
(This is NOT an original part; the OEM part numbers are used only for identification and comparison of the product type.)
Suitable for make/model/year:
Suitable for Yamaha SRX400 1985/1988
Suitable for Yamaha SRX600S 1986
Suitable for Yamaha SRX600SC 1986
Suitable for Yamaha SRX600 1986-1987
Suitable for Yamaha SRX600H 1986-1987
Suitable for Yamaha SRX600N 1986-1987
Suitable for Yamaha XT500T 3BJ1 1988
Suitable for Yamaha XT500T 3BJ2 1989
Suitable for Yamaha XT600 2KF 1987
Suitable for Yamaha XT600N 2NF 1987
Suitable for Yamaha XT600H 2KF 1987
Suitable for Yamaha XT600 2WJ1 1988
Suitable for Yamaha XT600 2WJ2 1989
Suitable for Yamaha XT600 3PW1 1989
Suitable for Yamaha XT600N 3PX1 1989
Suitable for Yamaha XT600H 3PW1 1989
Only suitable for Yamaha XT600 2KF 2NK 3PW (stator size: 115/54/20 mm) kickstart models. NOT for electric start models.
(The compatibility list is for reference only!!!)
(Please compare your defective device with the image we have provided to check the fit.)
Scope of delivery:
1 x 115 mm generator stator
1 x 4-pin voltage regulator
1 x Crankcase gasket
(Delivery exactly as pictured.)
A notice:
Before you install your new stator regulator rectifier,
Check the AC output of the stator.
Replace any burned or corroded connectors on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature resistant dielectric grease for all connectors.
Our stator/regulator may use a different color coding for the cables than your original part.
All cables are installed in the correct order; please do not change anything about the wiring.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use thread-locking compound when tightening the stator screws.
If our stator contains a pickup coil, always ensure the air gap is correct during installation.
You will receive exactly what you see in the pictures. If in doubt, please compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is only given as an indication of the intended use of the offered product as an accessory or spare part, in order to clarify for which vehicle the offered product is suitable.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert support: Solve your installation and product problems