Description
Generator-stator-regulator-rectifier gasket set for Daelim carburetor models VL 125, VC 125, VS 125, VT 125 Evolution
Characteristics: The set includes stator, regulator-rectifier and gasket.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator, which causes the stator to burn out within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: 100% new (aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 5
Number of plugs: 1
Number of pins: 3 + 1 + 1
Number of mounting holes: 3
Number of poles: 8
Including pulse generator coil.
regulator
Number of wires: 5
Number of plugs: 1
Number of pins: 5
Please compare the number of pins and connectors with your old part before purchasing.
Part number:
Stator assembly: 31120-BA1-0000, DAE-31120-BA1-0000, DAE-31120-BA5-9000, DAE-31120-KEZ-9000
Rectifier, regulator: 31600-BA7-9002,31600-KCK-9000,31600-KCK-9002,31600-KEZ-9002,31600-KEZ-9000,31600-KEZ-9003
Gasket, generator cover: 11395-BA7-0001, 11395-KCK-0000, 11395-KCK-0001, 11395-KW1-9000,11395-KW1-9001,11395-KW1-9010
(Always compare the part numbers with your parts diagrams and reference them accordingly.)
(This is NOT an original part. The OEM part numbers are used for identification and comparison of the product type only.)
Suitable for make/model/year:
For Daelim VC125 1996
For Daelim VS125 1997-1998
For Daelim VS125 Evolution 1999
For Daelim VS125 Evo 2000-2004
For Daelim VT125 1998
For Daelim VT125 Evolution 1999
Skin Daelim VT125 Evo 2000-2005
For Daelim VL/VL Classic (Daystar)
For Daelim VS 125 MJ 2006
This set is not suitable for EFI models, but only for carburetor models.
(The compatibility table is for reference only!)
(Please compare your defective component with the attached image to check compatibility.)
Scope of delivery:
1 x 8-pole generator stator
1 x 5-wire regulator/rectifier
1 x Crankcase gasket
(Scope of delivery as shown.)
A notice:
Before installing the new stator/controller/rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part.
All cables are connected in the correct order; please do not change the wiring.
This stator is designed as a direct replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, be sure to pay attention to the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.
The name of the vehicle manufacturer is only mentioned to identify the offered product as an accessory or spare part, in order to clarify for which vehicle the product is suitable.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert support: Solve your installation and product problems