Description
Gear position sensor pulse generator assembly suitable for Duk 125 200 250 390 RC 90111023000 90211023000
Features:
Brand new pulse generator/pulse coil for repairing your stator.
Direct replacement for your original device.
Often not available from the original manufacturer.
All shipped products are tested.
Specifications:
Condition: Used part, 100% new
Quantity: 1 piece
Type: Neutral conductor
Further specifications:
Number of wires: 9
Number of electrical outlets: 2
Number of pins: 3 + 6
Part number:
90111023000
90211023000
(Always compare the part numbers with the part drawings and make appropriate cross-references.)
(This is NOT an original part. The OEM part numbers are used for product identification and comparison purposes only.)
Suitable for model/year:
90111023000
Suitable for 125 Duke-e 2011-2016
Suitable for 125 Duk-e ABS 2011–2016
Suitable for 125 Duk-e ABS BD 2016
Suitable for 200 Duke-e 2012-2016
Suitable for 200 Duk-e ABS 2012–2016
Suitable for 200 Duk-e ABS BD 2013-2019
Suitable for 200 Duk-e ABS CKD 2014-2019
Suitable for RC 125 2014-2016
Suitable for RC 125 ABS 2014-2016
Suitable for RC 125 ABS BD 2014-2016
Suitable for RC 200 2014-2019
Suitable for RC 200 ABS 2014-2019
Suitable for RC 200 ABS BD 2014-2019
90211023000
Suitable for 250 Duke-e 2015-2016
Suitable for 250 Duk-e ABS 2015–2016
Suitable for 250 Duke-e ABS BD 2015-2016
Suitable for 390 Duke-e 2013-2016
Suitable for 390 Duk-e ABS 2013–2016
Suitable for 390 Duke ABS BD 2013-2016
Suitable for RC 250 2015-2017
Suitable for RC 250 ABS 2015-2017
Suitable for RC 250 ABS BD 2015-2017
Suitable for RC 390 2014-2016
Suitable for RC 390 ABS 2014-2016
Suitable for RC 390 ABS BD 2014-2016
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we have provided to check compatibility.)
Package contents:
1x neutral switch
NOTE:
Failure to follow these instructions may result in damage to the component or other parts of your vehicle.
-Connect the wires to the wires of your original wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-With certain models, it is necessary to adjust the air gap before starting the vehicle.
-Rotate the flywheel by hand until the raised node aligns with the pickup coil/pulse coil, and adjust it as accurately as possible, but not less than 0.010 inches.
-If there is no spark or only an irregular spark, replace the ignition cables at the spark plug.
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is only given to identify the product offered as an accessory or spare part, in order to clarify for which vehicle the offered product is suitable.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert online service: We solve your installation and product problems.
