Description
DC 24V Step Down to DC 12V 10A 120W Voltage Regulator Reducer Power Converter
Special feature:
1: Overvoltage protection, overcurrent protection.
2: Over-temperature protection, short-circuit protection.
3: Easy to install, anti-aging, good heat dissipation.
4: High conversion efficiency: Over 90%
5: Widely used in the automotive industry, monitoring systems, railway signals, medical devices, instruments and measuring devices, LED products, LED strips, cable television and other low power consumption test systems.
Special features:
Condition: 100% brand new
Housing material: Die-cast aluminum alloy
Input voltage: DC 24V
Input voltage range: 18V-35V DC
Output voltage: DC 12V
Output current: 10A
Rated output power: 120W
Conversion efficiency: >90%
Housing: IP68
Housing operating temperature: -40~80°C
Size: 64 x 53 x 20 mm/2.52 in * 2.09 in * 0.79 in
Weight: approx. 70g
Note:
1. Please correct the wiring and installation and make sure that the positive and negative polarities of the input and output are correct before turning on the device.
2. The battery power at the input end is within the input voltage range and the power is sufficient to ensure the normal operation of the power converter.
3. Please install it in a well-ventilated and heat-dissipating environment to avoid over-temperature protection of the power converter due to heat build-up.
4. If the ambient temperature exceeds 45 ℃, please reduce the power output or improve heat dissipation.
5. Please allow 1-3 mm difference due to manual measurement.
Package contents:
1x DC/DC converter regulator
Special feature:
1: Overvoltage protection, overcurrent protection.
2: Over-temperature protection, short-circuit protection.
3: Easy to install, anti-aging, good heat dissipation.
4: High conversion efficiency: Over 90%
5: Widely used in the automotive industry, monitoring systems, railway signals, medical devices, instruments and measuring devices, LED products, LED strips, cable television and other low power consumption test systems.
Special features:
Condition: 100% brand new
Housing material: Die-cast aluminum alloy
Input voltage: DC 24V
Input voltage range: 18V-35V DC
Output voltage: DC 12V
Output current: 10A
Rated output power: 120W
Conversion efficiency: >90%
Housing: IP68
Housing operating temperature: -40~80°C
Size: 64 x 53 x 20 mm/2.52 in * 2.09 in * 0.79 in
Weight: approx. 70g
Note:
1. Please correct the wiring and installation and make sure that the positive and negative polarities of the input and output are correct before turning on the device.
2. The battery power at the input end is within the input voltage range and the power is sufficient to ensure the normal operation of the power converter.
3. Please install it in a well-ventilated and heat-dissipating environment to avoid over-temperature protection of the power converter due to heat build-up.
4. If the ambient temperature exceeds 45 ℃, please reduce the power output or improve heat dissipation.
5. Please allow 1-3 mm difference due to manual measurement.
Package contents:
1x DC/DC converter regulator