Description
7-coil 5-wire magneto generator stator suitable for Chinese 50cc 2-stroke Jog Minarelli 1PE40QMB engine
Features:
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
Laminating materials of the highest quality.
Includes pick-up pulsar coil.
Plug included.
Rubber grommet included.
The stator has 7 coils, one of which is insulated.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Type: Stator coil
Further specifications:
Number of wires: 5
Number of connectors: 1x 3-pin connector with 2 drag chain connectors
Number of pins: 3 + 1 + 1
Number of mounting holes: 2
Number of poles: 7
Please compare the number of poles and connectors with your old part before purchasing.
Size:
Diameter of the central hole (smallest): 22 mm/0.87 inches
Diameter of the central hole (largest): 28 mm/1.1 inches
Outer diameter of the stator poles (largest): 79 mm/3.15 inches
Center-to-center distance of mounting holes: 104 mm/4.08 inches
Largest outer diameter of the stator (excluding pickup): 117.30 mm/4.62 inches
Largest outer diameter of the stator plate (including pickup): 136.75 mm/5.38 inches
Panel thickness (around the outer edge): 5 mm/0.2 inches
Maximum width: 136.35 mm/5.37 inches
Maximum height: 34.40 mm/1.35 inches
Cable length (approx.): 435 mm/17.13 inches
Suitable for the following models:
Suitable for most Chinese 49cc-50cc two-stroke engines based on Minarelli engines (Jog).
Suitable for 2-stroke quads, ATVs, and scooters. Similar to the parts used on many 100cc CPI products, Quadzilla Buzz 50cc bikes, and Aeon ATVs.
7-coil stator with 5 wires. 3-pin connector, 2 loose wires, 2 bolt holes, 104 mm bolt hole spacing.
There are several stator versions for 50cc engines. Please check and compare the stator and connector with your original part to ensure it's the correct one.
(The compatibility table is for reference only!!!)
(Please compare it with your defective device and the image we have provided to determine the specifications.)
Package contents:
1x 7-pole stator generator
OBSERVE:
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use a high-temperature resistant dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All cables are installed in the correct order. Please do not change any of the cable configurations.
This stator is designed as a direct plug-in set and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure the correct air gap during installation.
All product images are true to the original; if in doubt, do not hesitate to compare our product with your original part.
The battery's condition is important. No stator can replace a bad or weak battery. If in doubt, charge your battery and have it subjected to a load test, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY!
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The vehicle manufacturer's name is only provided to determine whether the offered product is an accessory or spare part, in order to clarify which vehicle the offered product is suitable for.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online experts: Solve your installation and product problems
