Description
Feature:
1: Made of high-quality material, oil-resistant, durable, wear-resistant, corrosion-resistant and non-hardening.
2: AC oil injector suitable for R134A R12 R22 air conditioning cooling systems for motor vehicles, filling tube for pure liquid refrigerant oil.
3: 2 oz refillable oiler (60 ml capacity), add the injection oil or fluorescent dye to the system, the filling speed is fast, good sealing, not easy to leak during use.
4: The AC oil injector tool is suitable for leak detection using fluorescent dyes, universally applicable to any type of oil, including POE or mineral oil.
Suitable for all types of refrigerants, suitable for automotive air conditioning systems and all home office air conditioning systems.
Instructions:
This injector can be used to add most A/C additives from oil, dye, leaks, etc. to our system.
The shut-off valve must be closed before adding additives to the injector.
Unscrew the end of the injector.
Add the desired amount of additive.
Screw the end back onto the injector.
Connect the R134A R12 F22 coupler to the injector.
Connect the other end of the injector to the low-pressure side service port on the vehicle.
Open the valve on the injector.
With the refrigerant connected, fill to the correct pressure.
Clean the injector tool thoroughly with brake cleaner after use.
Note: The air conditioning system must be running with the compressor switched on before additives or refrigerant are injected.
Special features:
Condition: 100% brand new
Material: Aluminum + Plastic
Tank capacity: 2 ounces
Size of the inlet and outlet thread: 1/4" SAE
Operating pressure: (600 ~ 3000) PSI
Note:
1. Please allow 1-5 mm difference due to manual measurement.
2. The color of the object shown in photos may differ slightly on your computer monitor because monitors are not calibrated the same.
Package contents:
1 x Oil and dye injector
1 x R-134a snap coupling
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems