Description
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 18.7 mm
Length: 26 mm
Width: 20.8 mm
Mounting distance from center to center: 34.8 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
PART NUMBERS:
59026-0028
59026-0009
Equipment:
Suitable for Kawasaki ZG1400 1400 GTR ABS 2008–2016
Suitable for Kawasaki ZG1400 Concours 14 2008-2010
Suitable for Kawasaki ZG1400 Concours 14 ABS 2008-2017
Suitable for Kawasaki ZX1400 Ninja ZX-14 2006-2011
Suitable for Kawasaki ZX1400 Ninja ZX-14R ABS 2012-2019
Suitable for Kawasaki ZX1400 ZZR1400 ABS 2006-2017
Suitable for Kawasaki ER650 ER-6N 2006-2011
Suitable for Kawasaki ER650 ER-6N ABS 2006-2010
Suitable for Kawasaki EX650 Ninja 650 2006-2013
Suitable for Kawasaki EX650 Ninja 650 ABS 2006–2013
Suitable for Kawasaki KLE650 Versys 650 2007-2013
Suitable for Kawasaki KLE650 Versys 650 ABS 2010–2014
Suitable for Kawasaki KLZ1000 Versys 1000 2012 2014
Suitable for Kawasaki Z1000 2007-2013
Suitable for Kawasaki Z1000 ABS 2007-2013
Suitable for Kawasaki ZX1000 Ninja ZX-10R 2004-2013
Suitable for Kawasaki ZX1000 Ninja ZX-10R ABS 2011-2013
Suitable for Kawasaki ZX1000 Ninja 1000 2011-2013
Suitable for Kawasaki ZX1000 Z1000SX 2011-2013
Suitable for Kawasaki ZX1000 Ninja 1000 ABS 2012-2013
Suitable for Kawasaki ZX1000 Z1000SX ABS 2012-2013
Package contents:
1x Pulsar coil
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we provided to Decide Fitments.)
A NOTICE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
