Description
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 19.4 mm
Length: 23mm
Width: 19.8 mm
Mounting distance from center to center: 35 mm
Other specifications:
Number of wires: 2
Number of plugs: 2
Number of pens: 2
ITEM NUMBER:
32150-87E20
Equipment:
Suitable for Suzuki DT100 1990-2000
Suitable for Suzuki DT115 1986-2000
Suitable for Suzuki DT140 1986-2000
Suitable for Suzuki DT150 1987-2003
Suitable for Suzuki DT175 1987-1992
Suitable for Suzuki DT200 1987-2000
Suitable for Suzuki DT225 1991-2003
Suitable for Suzuki DT25C 1988-2000
Suitable for Suzuki DT30C 1988-2000
Suitable for Suzuki DT50A 1992-1999
Suitable for Suzuki DT55 1988-1998
Suitable for Suzuki DT60 1994-2000
Suitable for Suzuki DT65 1988-1999
Suitable for Suzuki DT75 1988-1998
Suitable for Suzuki DT85 1988-2000
Suitable for Suzuki DT90 1994-2000

Package contents:
1x gear counter coil
A NOTICE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems