Description
English
ABS Pump Brake Booster Master Cylinder MR407202 for Mitsubishi Montero 2001-2002
Feature:
Common faults include:
The ABS warning light & buzzer activates
The brake pedal goes hard
Pump motor failure
Hydraulic brake booster pump motor open malfunction, fault code C1251
Hydraulic brake booster pump on time abnormally long, fault code C1252
Accumulator low pressure malfunction, fault code C1256
Accumulator pressure system malfunction, fault code 57 (Mitsubishi)
Solution:
We can offer a cost effect and time saving alternative to purchasing a complete remanufactured unit. We can repair the customer's own unit for the above listed faults. This also guarantees that no programming is required upon refitting of the unit.
Specifications:
Condition: Remanufactured
Manufacturer Part Number: MR407202
Fitment:
For Mitsubishi Montero 2001-2002
Package included:
1 x ABS Pump
Note:
1.Please make sure the part you purchased fit your car before purchasing. If you can't make sure, please send me message of your VIN, we will help you check.
2.Professional installation is recommended.
Before installing the ABS pump, the tire air must be drained as follows:
1. Install the six oil pipes of the ABS pump and do not install the plugs
2. Do not start the car and apply the brakes three or four times
3. Unscrew the air pump screw on the brake disc, first drain the gas from the left front wheel, and then drain the gas from the right front wheel
4. After exhausting the air, plug in the ABS pump plug
5. Apply the brake three times in a row, hear the sound of the engine turning, and then open the rear wheel exhaust valve. Evacuate the left and right wheels three times each
German
ABS pump/brake booster master cylinder MR407202 for Mitsubishi Montero (2001–2002)
Features:
Common mistakes:
The ABS warning light and buzzer are illuminated.
Brake pedal cannot be pressed firmly.
Pump motor defective
Hydraulic brake booster motor defective (error code C1251)
Hydraulic brake booster pump unusually long duty cycle (error code C1252)
Low pressure accumulator (error code C1256)
Print storage system defective (error code 57) (Mitsubishi)
Solution:
We offer a cost-effective and time-saving alternative to purchasing a refurbished unit. We repair the aforementioned faults on the customer's own device. Therefore, no programming is required after installation.
Specifications:
Condition: Refurbished
Manufacturer part number: MR407202
Suitable for:
For Mitsubishi Montero (2001–2002)
Scope of delivery:
1 x ABS pump
A notice:
1. Please ensure the part is compatible with your vehicle before purchasing. If you are unsure, please send me your vehicle identification number (VIN). We will be happy to assist you with the verification.
2. Professional installation is recommended.
Before installing the ABS pump, the tire air must be released as follows:
1. Install the six oil lines of the ABS pump, but do not insert the plugs.
2. Do not start the vehicle and brake three to four times.
3. Loosen the air pump screw on the brake disc and bleed the left front wheel first, then the right front wheel.
4. After bleeding, reinsert the plug of the ABS pump.
5. Apply the brake three times in succession until the engine noise is audible, and then open the exhaust valve of the rear wheel. Evacuate the left and right wheels three times each.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert support: Solve your installation and product problems