Description
Description:
1. Wind Solar Hybrid Controller for 12V, 24V, 36V, 48V, and 60V battery charging. MPPT tracking charging with autofocus, high charging efficiency, non-stop detection during charging, and two-way focus tracking.
2. Large LCD display, adjustable charging and discharging parameters. Ultra-wide charging and discharging parameters can be set. Accurate real-time display of temperature, charging current, and discharging current, and the cumulative power generation is clear at a glance.
3. Complete 3-stage charge management, effective battery protection, and extended battery life. This controller is suitable for all types of lead-acid batteries (including open, sealed, and colloidal batteries. Lithium batteries require custom parameters).
4. Both charging and discharging are combined using multiple MOSFETs, high-performance charging and discharging, and the aluminum alloy Phoenix Blade provides excellent heat dissipation. It features a two-way MOSFET anti-backflow circuit, a high-performance charging mode, and extremely low heat generation.
5. Built-in overheating, overcurrent, short circuit, open circuit, and reverse polarity protection. When the fault is rectified, the controller automatically resets itself without damaging the device. Short-circuiting the boost output power connector is strictly prohibited!
Note:
1. The BL4600 wind-solar hybrid charge controller is the most powerful current focus, tracking MPPT charging and enhanced MPPT charging.
2. The first group of batteries uses MPPT tracking, focusing on the highest power point to adjust the internal charging method and maximize the conversion of light energy to electrical energy. The second group of batteries uses MPPT charging with low-voltage boost and high-voltage constant-voltage tracking. Please refer to the technical specifications before purchasing to avoid misunderstandings.
3. This MPPT controller does not have an app control function, please be aware of this.
4. The actual operating current is not as high as the rated current. The rated current will function without problems for a short time; the power is then reduced to ensure the product's reliability and safety without fundamental failure. The actual application current is reduced accordingly. Please be aware of this. Our machines are somewhat more cost-effective; if you require a very high standard, please purchase with caution.
Features:
1. Industrial-grade main control chip, 16-step AD sampling accuracy, accurate real-time display of temperature, charging and discharging current, and cumulative current generation are visible at a glance.
2. MPPT tracking charging with autofocus, high charging efficiency, non-stop detection during charging, two-way focus tracking. Input 15V to 40V Boost MPPT for efficient charging.
3. Large LCD display, adjustable charging and discharging parameters. Ultra-wide charging and discharging parameters can be set. As long as you understand the battery's characteristics and set the appropriate charging parameters, you can charge any battery. The minute and hour of output power can be set, which is more convenient (many other devices on the market lack this minute setting).
4. Complete 3-stage charging management, effective battery protection, and extended battery life. This controller is suitable for all types of lead-acid batteries (including open, sealed, and colloidal batteries).Lithium batteries require custom parameters.
5. To charge the 12V/24V/36V/48V/60V battery, the voltage of the solar panel is 1.5 times the voltage of the battery to be charged.
6. Built-in overheating, overcurrent, short circuit, open circuit, and reverse polarity protection. When the fault is rectified, the controller automatically resets itself without damaging the device. Short-circuiting the boost output power connector is strictly prohibited!
7. Two-way MOS tube anti-backflow circuit, high-performance charging mode, extremely low heat generation.
8. Both charging and discharging are combined with multiple MOS, high-power charging and discharging, and the aluminum alloy of the Phoenix blade has good heat dissipation performance.
9. No battery is needed to power the load; it is a true sunshine application.
Specifications:
Type: MPPT controller
Color: Gold
Nominal charging current: 30A
Nominal discharge current: 10A
Own consumption: <10mA
USB output: 5V/2A max
Operating temperature: -10 to +60°C
Size/Weight: 268*138*66mm/650g
Package contents:
1 * MPPT controller
1 * Detailed instruction manual
Italy
1. Wind solar hybrid controller for batteries 12V 24V 36V 48V 60V. Ricarica di tracciamento MPPT with messa a fuoco automatica, high efficiency of ricarica, rilevamento continuo durante il processo di ricarica.
2. LCD display with a large power, parameters for the car and the scarica are controlled. Visualization at a real time, accuratating the temperature, the current of the car and the current of the scarica and the generation of cumulative energy and the chiara of the occhio.
3. Completa gestione della carica a 3 stadi, protegge efficacemente the battery and the battery and long duration. Questo controller is attached to the battery with the same value (comprese source aperte, sigillate e colloidali. The battery with litio richiedono parametersi definiti dall'utente).
4. This carica che the scarica sono combined with più MOS, carica e scarica ad alta potenza e la lega di aluminum dell'ala Phoenix ha buone prestazioni di dissipazione del heat. Circuito anti-riflusso del tubo MOS a due vie, modalità di ricarica at high potenza, ultra-low generation of heat.
5. Surriscaldamento integrato, sovracorrente, cortocircuito, protection of the circuit open, protection of the connection inversa, when the error is eliminated, the controller is ripristina automaticamente senza theneggiare the apparatus. The power supply port of the USCita Boost is severely damaged!
No:
1. The BL4600 solar controller is the best MPPT system for power monitoring and MPPT potential.
2. The first Gruppo di Batterie serves a tracciare la Corrente e concentrarsi sul punto di massima potenza dell'MPPT per regolare il metodo di carica interno per massimizzare la conversione dell'energia luminosa in energia elettrica.The second set of batteries is MPPT with boost bassa voltage and tracciamento della voltage cost ad alta voltage. Si prega di riconoscere the characteristics of technology at the moment of the acquisition, onde evitare fraintendimenti.
3. Do not search for MPPT controllers via the APP control function, per favore sappilo.
4. The current effective function is not equal to the nominal current. The current nominal function per a short period of time when there are problems, the power is verrà ridotta in seguito per garantire che il prodotto sia affidabile e sicuro senza rompersi in linea di principio, the current di apply effettiva verrà ridotta, si prega di sapere. The new machine is very comfortable, it is very comfortable and standard, it is purchased with cautela.
Features:
1. Chip for controlling the main industrial level, precision of campionnamento AD a 16 levels, visualization accurata at real time of temperature, current of carica and current of scarica and the generation of cumulative energy and chiara a colpo d'occhio
2. Caricamento del tracciamento MPPT with messa a fuoco automatica, high efficienza di carica, rilevamento non-stop durante il processo di carica tracciamento della messa a fuoco bidirectionale. Go from 15V to 40V MPPT boost the easy way.
3. LCD display with a large power, parameters for the car and the power can be regulated and it is possible to regulate the car and the power in the large area. If you compare the characteristics of the battery and set the parameters of the corresponding battery, you can also ensure that the battery is of the same quality. It is possible to regulate the minutes and the ore of the speed in use, which is very convenient (the market does not have the sole regulation of the minutes)
4. Completa la gestione della carica a 3 stadi, protegge efficacemente la battery e la battery è più duratura. Questo controller is attached to the battery with the same value (comprese source aperte, sigillate e colloidali. The battery with litio richiedono parametersi definiti dall'utente).
5. To charge the battery 12V/24V/36V/48V/60V, the voltage value of the solar panel is 1.5 volts.
6. Surriscaldamento incorporato, sovracorrente, cortocircuito, protection of the circuit open, protection of the connection inversa, when the error is eliminated, the controller is ripristina automaticamente senza theneggiare the apparatus. The power supply port of the USCita Boost is severely damaged!
7. Circuito anti-riflusso del tubo MOS a due vie, modalità di ricarica at high potenza, generation of ultra low heat.
8. This carica che the scarica sono combined with più MOS, carica e scarica ad alta potenza e la lega di aluminum dell'ala Phoenix ha buone prestazioni di dissipazione del heat
9.It is not necessary to use a battery for alimentazione al carico, it is a vera appazione del sole.
Specific:
Type: MPPT controller
Color: Oro
Current nominal voltage: 30A
Current nominal voltage: 10A
Self-consumption: <10mA
USB operation: 5V/2A max
Operating temperature: -10 to +60
Dimensions/Peso: 268*138*66mm/650g
Il pachetto includes:
1 * MPPT controller
1 * Utente detailed manual
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems