1999-2001 Touring Electra Glide Classic Ultra EFI Stator Regulator Rectifier Primary Seal Kit 2998799B 74505-97A

viprhSKU: M550-C549~26

Price:
Special price£140.00 GBP

Description

Generator-stator-regulator-rectifier gasket set suitable for Touring models 1999-2001

Features:
The set includes stator, regulator rectifier and gasket.
Meets or even exceeds OEM quality; direct replacement for your original part.
It fits perfectly and is ready for immediate installation.
Always use a sealant when installing the cable gland.
Instructions are NOT included.

Attention:
One of the most common reasons for stator failure is a defective regulator, which burns out the stator in a very short time.
We therefore strongly recommend that you replace both parts.
Technically modified stators are excluded from replacement.

Specifications:
Condition: Used part, 100% new
Type: Stator and regulator kit
Sealing material: Paper

Further specifications:
stator
Number of wires: 2
Number of electrical outlets: 2
Number of pins: 2
Number of mounting holes: 4
Number of poles: 12

regulator
Number of wires: 4
Number of plugs: 1
Number of pins: 2 + 1 + 1

Please compare the number of pins and connectors with the old part before purchasing.

Part number:
Stator assembly: 2998799B, 29987-99B
Rectifier, regulator: 74505-97, 74505-97A
Primary cover gasket set: 34901-94, 34901-94C

(Always compare the part numbers with the part drawings and make appropriate cross-references.)
(This is NOT an original part. The OEM part numbers are used for product identification and comparison purposes only.))

Suitable for model/year:
Fits Custom Vehicle Ops Road Glide Special EFI 2000
Fits CVO Road Glide 2001
Fits CVO Road Glide FLTRSEI 2000-2001
Suitable for Electra Glide Classic EFI 2001
Suitable for Electra Glide Classic FLHTC 2000-2001
Suitable for Electra Glide Classic FLHTC DJ 1999-2001
Suitable for Electra Glide Classic FLHTCI 1999-2001

Fits Electra Glide Standard FLHT 1999-2001
Suitable for Electra Glide Ultra Classic EFI 2001
Suitable for Police Electra Glide EFI 1999
Fit for Police Road King 1999
Suitable for Police Road King EFI 1999
Fits Road Glide EFI 2001
Fits Road Glide FLTR 1999-2001
Fits Road Glide FLTRI 1999-2001
Suitable for Road King Classic EFI 2001
Fits Road King Classic FLHRCI 1999-2001
Fits Road King EFI 2001
Fits Road King FLHR 2000-2001
Fits Road King FLHR FD 1999-2001
Suitable for Road King FLHRI 2000
Fits Road King FLHRI 2000-2001
Suitable for Touring Electra Glide Classic EFI 1999-2001
Suitable for Touring Electra Glide Classic FLHTC 1999-2000
Suitable for Touring Electra Glide Classic Ultra 2001
Suitable for Touring Electra Glide Classic Ultra EFI 1999-2001
Fits Touring Electra Glide Classic Ultra EFI Shrine 1999-2001
Suitable for Touring Electra Glide Shrine Classic 1999-2001
Suitable for Touring Electra Glide Standard 1999-2000
Suitable for Touring Electra Glide Standard Ultra 2001
Fits Touring Road Glide EFI FLTRI 1999-2001
Fits Touring Road Glide EFI FLTRSEI 2000-2001
Fits Touring Road Glide FLTR 1999-2000
Suitable for Touring Road Glide Ultra 2001
Suitable for 2001 Touring Road King
Suitable for Touring Road King Classic EFI 1999-2001
Suitable for Touring Road King EFI 2000-2001
Fits Touring Road King FLHR 1999-2000
Suitable for Ultra Classic FLHTCUI 1999-2001

(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we have provided to check compatibility.)

Scope of delivery:
1 x 12-pole generator stator
1 x 4-wire regulator rectifier
1 x Primary gasket set

(Delivered exactly as pictured.)

Note:
Before installing your new stator regulator rectifier;

Check the AC output of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any burnt-out cables.
Use high-temperature dielectric grease on all connectors.
Our stator/regulator may use a different cable color code than your original part.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Threadlocker must always be used when screwing on the stator.
If our stator contains a pickup coil, be sure to pay attention to the correct air gap during installation.

You will receive exactly what you see in the pictures. If in doubt, please compare our item with your original part.
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is only given to identify the product offered as an accessory or spare part, in order to clarify for which vehicle the offered product is suitable.

Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert online service: We solve your installation and product problems.

You can also like

Last viewed