Description
10A 12V 24V 48V Solar Charge Controller with WiFi Monitoring Function, PWM LCD Controller for LiFePO4 Lead-Acid Gel Batteries
A notice:
The app for this machine is only compatible with Android and Hongmeng systems; it is not compatible with iOS. The app language is English only. Please be aware of these product limitations before purchasing. Thank you!
Characteristics:
1. Use an industrial-grade main chip.
2. Large screen, LCD display, adjustable charging and discharging parameters.
3. Complete 3-stage PWM charging management.
4. Built-in near-load protection, short-circuit protection, open-circuit protection and reverse polarity protection, all self-recovery and protection against damage to the controller.
5. Two USB ports make charging more flexible.
6. The WiFi app can check and configure it at any time.
7. Battery temperature detection function (optional).
Specifications:
Model: PV-10A
Charging current: 10A
MAX. PV-Volt: 12V system<25V/24V system<50V/48V system<100V
USB output: 5V 2A MAX
Current standby voltage: 12V<80mA; 24V<45mA; 48V<30mA;
Product size: 145 * 115 * 57 mm
Temperature: -20 °C ~ 50 °C
12V battery connected to the largest photovoltaic module: 130W
24V battery connected to the largest photovoltaic module: 260W
A notice:
1. This charge controller automatically identifies 12/24/48V. Please ensure your battery has sufficient voltage for the controller to recognize the battery type before first installation.
2. The battery cable should be as short as possible to minimize losses and not interfere with normal voltage assessment.
3. This controller is suitable for ternary lithium, LiFePO4 and lead-acid batteries.
4. The charge controller is only suitable for regulating solar panels. Never connect any other charging source to the charge controller.
5. The controller generates heat when it is running; please ensure that the controller is installed on a flat, well-ventilated surface.
Installation method:
1. Connect the battery to the controller. It is recommended to add an air switch between the controller and the battery to protect both. Once the controller is connected to the battery, the parameters will be displayed on the LCD screen, and then the battery type will be set.
2. If you need a DC output to control the load, please first set the output control mode and then turn on the DC output switch.
3. Connect the solar module (PV) to the controller when the PV input voltage is available at the controller.
Within the charging operating range, the controller switches to the charging state.
4. It is recommended that the controller install an air switch on the battery, solar panel, and load to provide a protective function.
Package includes:
1 * Solar charge controller unit
1 * Detailed user manual
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert support: We solve your installation and product problems.