Description
114 mm generator stator regulator rectifier gasket set for MSU UTV 800 1000 Massimo
Characteristics:
The set includes stator, regulator, rectifier and gasket.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator, which causes the stator to burn out within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: 100% new (aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of mounting holes: 3
Number of poles: 18
Inner diameter: 42 mm
Outer diameter: 114 mm
regulator
Number of plugs: 2
Number of pins: 2 + 3
Please carefully inspect your stator assembly and compare the appearance of the stator closely before ordering.
Part number:
Stator assembly: 21040109702, 21040109705
Rectifier, regulator: 21051100201, 21051100202, 21051100203
Gasket, generator cover: 21040111301
(Always compare the part numbers with your parts diagrams and refer to them accordingly.)
(This is NOT an original part. The OEM part numbers are used for identification and comparison of the product type only.)
Suitable for make/model/year of manufacture:
Suitable for Massimo UTV MSU800
Suitable for Massimo UTV MSU800-5
Suitable for Massimo UTV MXU1000
Suitable for Massimo UTV WARRIOR 800
Suitable for Massimo UTV WARRIOR 1000
Suitable for Massimo UTV X2-800 LT
Suitable for Massimo UTV X2-1000
Suitable for Massimo UTV X4-1000 LT
Suitable for Massimo UTV XF-3
Suitable for Russian Mechanics Frontier 1000
This is the ignition coil of the AC generator. Stator with a grey 3-pin connector (not black).
There are two different stator sizes: 114 mm (4.5 inches) and 104 mm (4.1 inches). Please measure your stator diameter.
Carefully inspect your stator assembly and compare the appearance of the stator closely before ordering.
(Compatibility table is for reference ONLY!!!)
(Please compare your defective device with the image we have provided to determine the compatible models.)
Scope of delivery:
1 x 114 mm generator stator
1 x 5-pin regulator
1 x crankcase seal
(Delivery as pictured.)
A notice:
Before installing your new stator regulator rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part.
All cables are connected in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, please ensure the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.The name of the vehicle manufacturer serves only to identify the offered product as an accessory or spare part, in order to clarify for which vehicle it is suitable.
Characteristics:
The set includes stator, regulator, rectifier and gasket.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator, which causes the stator to burn out within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: 100% new (aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of mounting holes: 3
Number of poles: 18
Inner diameter: 42 mm
Outer diameter: 114 mm
regulator
Number of plugs: 2
Number of pins: 2 + 3
Please carefully inspect your stator assembly and compare the appearance of the stator closely before ordering.
Part number:
Stator assembly: 21040109702, 21040109705
Rectifier, regulator: 21051100201, 21051100202, 21051100203
Gasket, generator cover: 21040111301
(Always compare the part numbers with your parts diagrams and refer to them accordingly.)
(This is NOT an original part. The OEM part numbers are used for identification and comparison of the product type only.)
Suitable for make/model/year of manufacture:
Suitable for Massimo UTV MSU800
Suitable for Massimo UTV MSU800-5
Suitable for Massimo UTV MXU1000
Suitable for Massimo UTV WARRIOR 800
Suitable for Massimo UTV WARRIOR 1000
Suitable for Massimo UTV X2-800 LT
Suitable for Massimo UTV X2-1000
Suitable for Massimo UTV X4-1000 LT
Suitable for Massimo UTV XF-3
Suitable for Russian Mechanics Frontier 1000
This is the ignition coil of the AC generator. Stator with a grey 3-pin connector (not black).
There are two different stator sizes: 114 mm (4.5 inches) and 104 mm (4.1 inches). Please measure your stator diameter.
Carefully inspect your stator assembly and compare the appearance of the stator closely before ordering.
(Compatibility table is for reference ONLY!!!)
(Please compare your defective device with the image we have provided to determine the compatible models.)
Scope of delivery:
1 x 114 mm generator stator
1 x 5-pin regulator
1 x crankcase seal
(Delivery as pictured.)
A notice:
Before installing your new stator regulator rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part.
All cables are connected in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, please ensure the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.The name of the vehicle manufacturer serves only to identify the offered product as an accessory or spare part, in order to clarify for which vehicle it is suitable.