Description
DC/DC converter regulator, 12V step, up to 24V, 15A, 360W
Feature:
1: Synchronous rectification, conversion rate is 93% with very low heat generation.
2: Automatic protection against overvoltage, overcurrent, overtemperature, short circuit; can function again upon restoration to normal operation.
3: Epoxy potting, earthquake resistant, water resistant, moisture resistant, dust resistant, long-term stable and reliable quality.
4: Thin, small, highly efficient, easy installation. Waterproof aluminum alloy shell; stable and reliable quality.
Special features:
Condition: 100% brand new
Shell material: Aluminum
Type: DC-DC boost converter
Size (mm): 76 x 76 x 35
Hole spacing: 65 mm
Diameter: 6 mm
Cable length: 165mm
Input voltage: DC 12V
Output parameters: DC 24V ± 0.25V
Output power: 15A 360W
Operating temperature: (-40 ℃ ~ 80 ℃)
Increase in full load temperature: 50 °C.
Load control: ± 1%
Voltage regulation rate: ± 2%
Minimum pressure: 2V
A notice:
1. Please ensure that sufficient input supply voltage and power are available to guarantee that the module can output sufficient voltage and power.
2. Please use an average load; do not combine multiple output cables if they are connected to the output port.
3. You must ensure that the power module cools down when the output reaches its maximum current value.
4. If the temperature exceeds 40°C, please adjust the power setting to a lower level or improve heat dissipation.
5. Connect the input voltage polarity strictly according to the wiring diagram; do not reverse it. Otherwise, the power supply module may be damaged. Reversing the output voltage polarity may damage electrical equipment.
Package contents:
1x DC-DC converter
Feature:
1: Synchronous rectification, conversion rate is 93% with very low heat generation.
2: Automatic protection against overvoltage, overcurrent, overtemperature, short circuit; can function again upon restoration to normal operation.
3: Epoxy potting, earthquake resistant, water resistant, moisture resistant, dust resistant, long-term stable and reliable quality.
4: Thin, small, highly efficient, easy installation. Waterproof aluminum alloy shell; stable and reliable quality.
Special features:
Condition: 100% brand new
Shell material: Aluminum
Type: DC-DC boost converter
Size (mm): 76 x 76 x 35
Hole spacing: 65 mm
Diameter: 6 mm
Cable length: 165mm
Input voltage: DC 12V
Output parameters: DC 24V ± 0.25V
Output power: 15A 360W
Operating temperature: (-40 ℃ ~ 80 ℃)
Increase in full load temperature: 50 °C.
Load control: ± 1%
Voltage regulation rate: ± 2%
Minimum pressure: 2V
A notice:
1. Please ensure that sufficient input supply voltage and power are available to guarantee that the module can output sufficient voltage and power.
2. Please use an average load; do not combine multiple output cables if they are connected to the output port.
3. You must ensure that the power module cools down when the output reaches its maximum current value.
4. If the temperature exceeds 40°C, please adjust the power setting to a lower level or improve heat dissipation.
5. Connect the input voltage polarity strictly according to the wiring diagram; do not reverse it. Otherwise, the power supply module may be damaged. Reversing the output voltage polarity may damage electrical equipment.
Package contents:
1x DC-DC converter
