Description
FEATURES:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 23.4 mm
Length: 34.8 mm
Width: 27.3 mm
Mounting distance from center to center: 40 mm 
Other specifications:
Number of pens: 1
PART NUMBERS):
30300-HA0-033
30300-KFB-751
VEHICLE MODELS EQUIPMENT:
Suitable for Honda TRX125 1987-1988
Suitable for Honda TRX200SX/D 1986-1997
Suitable for Honda TRX250 Recon TM TE 2002-2009
Suitable for Honda TRX250EX 2001-2008
Suitable for Honda TRX250X 1987-1992
Suitable for Honda TRX300 Fourtrax 1988-2000
Suitable for Honda TRX300EX 1993-2008
Suitable for Honda TRX300X 2009
Suitable for Honda TRX300 FW 1990-2000
Suitable for Honda TRX350 Foreman 4X4 1986-1987
Suitable for Honda TRX350D 1987-1989
Fits Honda TRX350 Rancher FE/FM/TE/TM 2000-2006
Suitable for Honda FL400R Pilot 1989-1990
Suitable for Honda TRX400 FW Foreman 1995-2003
Fits Honda TRX400 FA/FGA Rancher 2004–2007
Suitable for Honda TRX450 ES/FE/FM/S Foreman 1998–2004
Suitable for Honda TRX500 FA/GH/PA Foreman Rubicon 2001–2009
Suitable for Honda TRX650 FA/GA Rincon 2003-2005
Suitable for Honda CLR125 City Fly 1998-2003
Suitable for Honda XLR125 XLR125RW 1998-2001
Suitable for Honda FTR223
Suitable for Honda CRF230 CRF230L 2008-2009
Suitable for Honda CRF230 CRF230M 2009
Suitable for Honda SL230 SL230X 2002
Suitable for Honda NX250 AX-1 1988-1993
Suitable for Honda NX250 2 1990/1993
Suitable for Honda NX250 A 1988-1990
DELIVERY CONTENTS:
1x Pulsar coil
NOTE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 23.4 mm
Length: 34.8 mm
Width: 27.3 mm
Mounting distance from center to center: 40 mm
Other specifications:
Number of pens: 1
PART NUMBERS):
30300-HA0-033
30300-KFB-751
VEHICLE MODELS EQUIPMENT:
Suitable for Honda TRX125 1987-1988
Suitable for Honda TRX200SX/D 1986-1997
Suitable for Honda TRX250 Recon TM TE 2002-2009
Suitable for Honda TRX250EX 2001-2008
Suitable for Honda TRX250X 1987-1992
Suitable for Honda TRX300 Fourtrax 1988-2000
Suitable for Honda TRX300EX 1993-2008
Suitable for Honda TRX300X 2009
Suitable for Honda TRX300 FW 1990-2000
Suitable for Honda TRX350 Foreman 4X4 1986-1987
Suitable for Honda TRX350D 1987-1989
Fits Honda TRX350 Rancher FE/FM/TE/TM 2000-2006
Suitable for Honda FL400R Pilot 1989-1990
Suitable for Honda TRX400 FW Foreman 1995-2003
Fits Honda TRX400 FA/FGA Rancher 2004–2007
Suitable for Honda TRX450 ES/FE/FM/S Foreman 1998–2004
Suitable for Honda TRX500 FA/GH/PA Foreman Rubicon 2001–2009
Suitable for Honda TRX650 FA/GA Rincon 2003-2005
Suitable for Honda CLR125 City Fly 1998-2003
Suitable for Honda XLR125 XLR125RW 1998-2001
Suitable for Honda FTR223
Suitable for Honda CRF230 CRF230L 2008-2009
Suitable for Honda CRF230 CRF230M 2009
Suitable for Honda SL230 SL230X 2002
Suitable for Honda NX250 AX-1 1988-1993
Suitable for Honda NX250 2 1990/1993
Suitable for Honda NX250 A 1988-1990
DELIVERY CONTENTS:
1x Pulsar coil
NOTE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
