Description
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 17.6 mm
Length: 26mm
Width: 22 mm
Mounting distance from center to center: 33.7 mm
Other specifications:
Number of wires: 2
PART NUMBERS):
59039034000
81239034044
Equipment:
Suitable for 125 XCW 2017–2018
Suitable for 150 XCW 2017-2019
Suitable for 200 XCW 2008-2016
Suitable for 200 EXC 2013-2016
Suitable for 250 XC 2008-2016
Suitable for 250 XCW 2008-2016
Suitable for 250 XC USA AND EU MIX 2008–2016
Suitable for 250R Freeride 2014-2017
Suitable for 250 EXC 2008-2016
Suitable for 250 EXC SIX DAYS 2008-2016
Suitable for 250 EXC FACTORY 2011/2015
Suitable for 250 EXC FACTORY EDITION 2011/2015
Suitable for 250 XCF 2011-2015
Suitable for 350 XCF 2011-2015
Suitable for 250 SXF 2012-2015
Suitable for 350 SXF 2011–2015
Suitable for 350 SX-F CAIROLI REPLICA 2012
Suitable for 350 SX-F CAIROLI REPLICA 2011
Suitable for 300 2009-2016
Suitable for 300 XC 2008-2016
Suitable for 300 XCW 2008-2016
Suitable for 300 XCW SIX DAYS 2014-2016
Suitable for 300 EXC-E 2007-2008
Suitable for 300 EXC-E SIX DAYS 2008/2010-2011
Suitable for 300 EXC 2009-2016
Suitable for 300 EXC SIX DAYS 2009/2012-2016
Suitable for 300 EXC FACTORY EDITION 2011/2015
Suitable for Husqvarna FC250 2014–2015
Suitable for Husqvarna FC350 2014–2015
Suitable for Husqvarna FC 350 HQV 2014
Suitable for Husqvarna FC 250 HQV 2014
Suitable for Husqvarna TC 250 2014
Suitable for Husqvarna TX125 2017-2018
Suitable for Husqvarna TE150 2017-2018
Suitable for Husqvarna TE250 2011-2016
Suitable for Husqvarna TE300 2011-2016
Suitable for Husaberg TE250 2011-2013
Suitable for Husaberg TE300 2012-2013
Suitable for Suzuki RMZ250 2014-2017
Suitable for Suzuki RMZ450 2013–2018
Suitable for Suzuki RMZ250 2010-2013
Suitable for Suzuki RMZ450 2008-2012
Package contents:
1x Pulsar coil
NOTE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
