Description
Special feature:
1: Made of high-quality material, durable and practical to use.
2: The magnetic speed sensor is mounted in the ring gear housing or flywheel bell housing of the motor.
3: The threaded hole for the speed sensor should be perpendicular to the center line of the crankshaft.
Centered over the teeth of the dental arch. A point surface should be present to create a flat surface for anchorage.
With the engine off, screw the speed sensor in until it touches a gear tooth, then turn it out 3/4 of a turn.
Turn and secure with the lock nut. Any iron gear can be used as long as the frequency and amplitude are maintained.
the resulting signal must meet the specifications of the speed control unit
The cables should be twisted along their entire length from the magnetic speed sensor to the control unit.
The cables may need to be shielded if they are longer than 3 m or if there is external interference.
Do not connect any of the speed sensor cables to anything other than the speed control unit being used.
The shield should not be connected on the side of the speed sensor.
Special features:
Condition: 100% brand new
Range: 50–5000 Hz
Temperature range: -20℃ Celsius to 60℃
Pickup length: 3125"
Thread length: 2.75 inches
Cable length: 700"
Thread size: 5/8-18 UNF-2A
Drill bit size: 37/64
Note:
1. Please allow 1-3 mm difference due to manual measurement.
2. Due to differences in lighting and screen settings, the color of the item may vary slightly from the pictures.
Package contents:
1 x MSP675 speed sensor
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems