Description
Specification:
100% brand new.
Operating voltage: For DC 12 V (9 V ~ 14 V)
Static current: <=4mA
Operating temperature: -10℃~+50℃
Remote control operating voltage: DC6V/9V/12V
Remote control frequency range: 315 MHz or 433 MHz
Remote control range: Open areas《150M
Item size: as shown in the image gallery.
Packaging dimensions: approx. 15.8 cm (L) x 9 cm (W) x 6.5 cm (H)
Features:
- 100% brand new.
- Telephone alarm, can be used to locate your motorcycle
- Engine immobilization and anti-hijacking function
- Four sensitivity alarm settings
- This is a simple DIY installation unit that requires no special tools.
Function key: (4 keys)
Arm/Anti-robbery: Remote lock
Disarm: Remote unlock style
Remote Start Engine: Remote start style
Find vehicle: A bell style
Features:
1. Arming: Press the arm/anti-theft button, the indicator light will flash once, the siren will beep once, and the alarm status will be automatically activated after 3 seconds.
2. Disarm: Press the disarm button, the indicator light will flash twice and the siren will sound twice, then the alarm system is in "disarmed" mode.
3. Remote start ON: Within 2 seconds, press the start button twice to start the engine.
4. Remote Start OFF: In the start state, press the deactivation button to stop the engine.
5. Locate vehicle: Press the vehicle finder button; the indicator light will flash for 15 seconds and the siren will sound for 15 seconds. Allow the owners to locate the vehicle; to stop, press any button.
6. Anti-theft and assistance: If the motorcycle is rocked and drives away, the motorcycle owner only needs to press the alarm/anti-theft button, the engine will stop immediately, the siren will sound and the indicator light will flash.
7. Shock sensor:
Warning signal: After arming, the indicator light flashes 5 times and the siren beeps 5 times when exposed to light.
Full activation: After arming in the event of a strong impact, the indicator light flashes for 1 second and the siren sounds (6 tones) for 15 seconds.
8. Ignition trigger: The ignition trigger: If someone attempts to ignite the fire while the alarm is triggered, the siren will sound and the indicators will begin to flash.
9. Immobilizer: In alarm mode, the siren will sound, the warning light will flash, and the engine cannot be started.
10. Adjusting the shock sensor: Press and hold the fine vehicle button. The remote control can adjust the sensor sensitivity from level 1 to 5, depending on the number of siren tones at the set level (level 1 lowest, level 2 low, ... , level 5 highest).
A notice: for engine type with remote start