Description
Pulsar pickup coil suitable for Kawasaki ZG1000 Concours 1000 1986-2006 ZX900 GPZ900R # .59026-1061
CHARACTERISTICS:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All delivered products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 piece
Type: Pick up pulse coil
Mass:
Height: 19mm
Length: 26 mm
Width: 21 mm
Mounting distance from center to center: 35 mm
Cable length: Approx. 640 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
Spare part number (P/N): 59026-1061
VEHICLE MODELS
Suitable for Kawasaki ZG1000 Concours1000 1986-2006
Suitable for Kawasaki ZG1000 GTR1000 1986-2003
Suitable for Kawasaki ZL1000 Eliminator1000 1987-1988
Suitable for Kawasaki ZL900 Eliminator900 1985-1986
Suitable for Kawasaki ZX900 Ninja900 1984-1986
Suitable for Kawasaki ZX900 GPZ900R 1984-1991
Suitable for Kawasaki ZX900 GPZ900R 1993-1998
Suitable for Kawasaki ZX900 GPZ900R 2000-2002
DELIVERY CONTENTS:
1x pulse coil
OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or arcing, swap the wires at the connector.
CHARACTERISTICS:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All delivered products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 piece
Type: Pick up pulse coil
Mass:
Height: 19mm
Length: 26 mm
Width: 21 mm
Mounting distance from center to center: 35 mm
Cable length: Approx. 640 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
Spare part number (P/N): 59026-1061
VEHICLE MODELS
Suitable for Kawasaki ZG1000 Concours1000 1986-2006
Suitable for Kawasaki ZG1000 GTR1000 1986-2003
Suitable for Kawasaki ZL1000 Eliminator1000 1987-1988
Suitable for Kawasaki ZL900 Eliminator900 1985-1986
Suitable for Kawasaki ZX900 Ninja900 1984-1986
Suitable for Kawasaki ZX900 GPZ900R 1984-1991
Suitable for Kawasaki ZX900 GPZ900R 1993-1998
Suitable for Kawasaki ZX900 GPZ900R 2000-2002
DELIVERY CONTENTS:
1x pulse coil
OBSERVE:
Failure to follow these instructions may result in damage to the part or other components of your vehicle.
- Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
-Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If there is no spark or arcing, swap the wires at the connector.
