Description
Pulsar pickup coil, suitable for Kawasaki KLF220 Bayou 220 1988-1995 #.59026-1088
Characteristics:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often no longer available from the OEM manufacturer.
All delivered products are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 PC
Type: Pick-up pulsar coil
Resistance: 120 ohms
Dimensions:
Height: 19mm
Length: 26mm
Width: 21mm
Clamp center to center: 35mm
Length of wires: Approx. 1170mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
Part number:
59026-1088
Fits models:
Fits Kawasaki KLF220 Bayou 220 1988-1995
Package contains:
1x Pick up Pulsar coil
Danger!
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
-Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, you may need to adjust the air gap on certain models.
Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as accurately as possible, but not less than 0.010 inches.
-If there is no spark or an irregular spark, swap the wires on the candle.24-hour online expert: Solve your installation and product problems
Characteristics:
Brand new pickup/pulsar coil for repairing your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often no longer available from the OEM manufacturer.
All delivered products are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 PC
Type: Pick-up pulsar coil
Resistance: 120 ohms
Dimensions:
Height: 19mm
Length: 26mm
Width: 21mm
Clamp center to center: 35mm
Length of wires: Approx. 1170mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
Part number:
59026-1088
Fits models:
Fits Kawasaki KLF220 Bayou 220 1988-1995
Package contains:
1x Pick up Pulsar coil
Danger!
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
-Solder the wires to the wires of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, you may need to adjust the air gap on certain models.
Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as accurately as possible, but not less than 0.010 inches.
-If there is no spark or an irregular spark, swap the wires on the candle.24-hour online expert: Solve your installation and product problems
