Description
FURNISHINGS:
Honda CRF110F 2013-2018
FEATURES:
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
Highest quality lamination materials.
Windings made of the highest quality copper, resistant up to 200 degrees Celsius.
Pick-up pulsar coil included.
Plug included.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Generator stator coil
Part number: 31120-KYK-911
Dimensions:
Inner diameter: 35 mm/1.37 inches
Outer diameter: 93 mm/3.66 inches
Rod Thickness: 20.4mm/0.80"
Rod width: 16 mm/0.63 inches
Other specifications:
Number of wires: 4
Number of pens: 3
Number of plugs: 2
Number of mounting holes: 4 (+2)
Number of poles: 12
DELIVERY CONTENTS:
1x Generator stator coil
NOTE:
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.
All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.
Honda CRF110F 2013-2018
FEATURES:
Direct replacement for your original device
Plug-and-play, direct fit, easy installation.
Highest quality lamination materials.
Windings made of the highest quality copper, resistant up to 200 degrees Celsius.
Pick-up pulsar coil included.
Plug included.
All shipped products are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Generator stator coil
Part number: 31120-KYK-911
Dimensions:
Inner diameter: 35 mm/1.37 inches
Outer diameter: 93 mm/3.66 inches
Rod Thickness: 20.4mm/0.80"
Rod width: 16 mm/0.63 inches
Other specifications:
Number of wires: 4
Number of pens: 3
Number of plugs: 2
Number of mounting holes: 4 (+2)
Number of poles: 12
DELIVERY CONTENTS:
1x Generator stator coil
NOTE:
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator may use a different cable color code than your original.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use locking compound when screwing in the stator.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.
All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.