Description
English
Magneto Generator Stator Fit for Yamaha WR 125 RX 2009-2017 MT-125 A YZF-R 125 A ABS 2014-2020
Features:
Direct replacement to your original unit
Plug and play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
Rubber grommet included.
Pick-up pulsar coil included.
All products shipped are tested.
As an inexpensive alternative to the expansive original part.
Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 PC
Type: Stator Coil
Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pins: 3 + 2
Number of poles: 18
Replacement Part Number:
22B-H1410-00
3C1-H1410-11
Fits Make/Model/Year:
Fit for Yamaha WR125R (DE071) 2009-2017
Fit for Yamaha WR125X (DE072) 2009-2017
Fit for Yamaha MT125 (RE11) 2015-2016
Fit for Yamaha MT125 A ABS (RE114/RE115) 2015-2016
Fit for Yamaha MT125 A ABS (RE292/RE392) 2017-2020
Fit for Yamaha YZF-R 125 (RE11) 2014-2016
Fit for Yamaha YZF-R 125 A ABS (RE111/RE112/RE291/RE391) 2015-2016
Fit for Yamaha YZF-R 125 ABS 2017-2018
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Stator Generator
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY!
The product on offer is an accessory or spare part and therefore is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify for which vehicle the product on offer fits.
German
Alternator stator suitable for Yamaha WR 125 RX 2009-2017 MT-125 A YZF-R 125 A ABS 2014-2020
Features:
Direct replacement for your original device
Plug-and-play, direct installation, easy installation.
Highest quality lamination materials.
High-quality copper windings, resistant up to 200 degrees Celsius.
Plug included.
Includes rubber grommet.
Includes Pulsar coil.
All delivered products are tested.
As a cost-effective alternative to the expensive original part.
Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 PC
Type: Stator coil
Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pens: 3 + 2
Number of poles: 18
Part number:
22B-H1410-00
3C1-H1410-11
Fits make/model/year:
Suitable for Yamaha WR125R (DE071) 2009-2017
Suitable for Yamaha WR125X (DE072) 2009-2017
Suitable for Yamaha MT125 (RE11) 2015-2016
Suitable for Yamaha MT125 A ABS (RE114/RE115) 2015-2016
Suitable for Yamaha MT125 A ABS (RE292/RE392) 2017-2020
Suitable for Yamaha YZF-R 125 (RE11) 2014-2016
Suitable for Yamaha YZF-R 125 A ABS (RE111/RE112/RE291/RE391) 2015-2016
Suitable for Yamaha YZF-R 125 ABS 2017-2018
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we have provided to determine fitment)
Package includes:
1x Stator Generator
A NOTICE!
Before you install your new stator
Check the AC output of the stator.
Replace any burnt or corroded connectors on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease for all connections.
Our stator may use a different color code for the wires than your original.
All wires are laid in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use thread-locking compound when screwing the stator in place.
If our stator contains a pickup coil, always ensure that the air gap is correct during installation.
All product images are accurate; if in doubt, please do not hesitate to compare our product with your original part.
The battery's condition is important. No stator can compensate for a poor or weak battery. If in doubt, charge your battery and have it subjected to a load test, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY!
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is only given as an indication of the intended use of the offered product as an accessory or spare part, to clarify which vehicle the offered product is suitable for.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert support: Solve your installation and product problems
