Description
Pulse generator assembly for Duk 690 Enduro Rally SMC/R Supermoto 2008–2024
Features:
Brand new pulse generator/pulse coil for repairing your stator.
Direct replacement for your original part.
Often not available from the original manufacturer.
All shipped products have been inspected.
Specifications:
Condition: 100% new (aftermarket)
Quantity: 1 piece
Type: Pulse sensor
Further specifications:
Number of cables: 2
Number of plugs: 1
Number of pins: 2
Part number:
60039034100
75039034000
(Always compare the part numbers with your exploded views and use cross-references where appropriate.)
This is NOT an original part. The OEM part numbers provided are for product identification and comparison purposes only.
Suitable for model/year of manufacture:
60039034100
For 950 Adventure 2003–2006/2010
For 950 Adventure S 2004–2006
For 950 Super Enduro R 2006–2008
For 950 Super Enduro 2007–2009
For 950 Supermoto 2005-2007
For 950 Supermoto R 2007-2008
For 990 Adventure 2006-2012
For 990 Adventure ABS 2006-2012
For 990 Adventure Dakar Edition 2011
For 990 Adventure R 2009-2012
For 990 Adventure S 2006-2008
For 990 Super Duk-e 2005-2011
For 990 Super Duk-e R 2007-2013
For 990 Supermoto 2008-2009
For 990 Supermoto R 2009-2013
For 990 Supermoto R ABS 2009-2013
For 990 Supermoto T 2009-2013
For 990 Supermoto T ABS 2009-2013
75039034000
For 690 Duk-e 2008-2019
For 690 Duk-e ABS 2008-2019
For 690 Duk-e R 2010-2017
For 690 Duk-e R ABS 2010-2017
For 690 Enduro 2008-2010
For 690 Enduro R 2009-2024
For 690 Enduro R ABS 2009-2024
For 690 Rally Factory Replica 2007-2010
For 690 SMC 2008-2011
For 690 SMC R 2012-2024
For 690 SMC R ABS 2012-2024
Fell 690 Supermoto 2007-2009
For 690 Supermoto R 2008
For Gas Gas ES700 2022-2024
For Gas Gas SM700 2022-2024
For Husqvarna 701 Enduro 2016–2024
For Husqvarna 701 Supermoto 2016–2024
For Husqvarna Svartpilen 701 2019-2020
For Husqvarna Svartpilen 701 Style 2019
For Husqvarna Vitpilen 701 2018–2020
For Husqvarna 701 FE 2021-2024
For Husqvarna 701 FS 2021–2024
(The compatibility table is for reference ONLY!!!) (Please compare your defective component with the image we have provided to check compatibility.)
Scope of delivery:
1x pulse sensor
A NOTICE: Failure to follow these instructions may result in damage to the component or other vehicle components.
- Solder the cables to the cables of your original wiring harness using a small soldering iron.
- Insulate the solder joints with heat shrink tubing.
- Before starting the vehicle, the spark gap must be adjusted on certain models.
- Rotate the flywheel by hand until the raised node aligns with the pulse generator coil, and adjust the distance as precisely as possible, but not less than 0.25 mm.
- If there is no spark or only an irregular spark, replace the ignition cables at the spark plug.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.
The name of the vehicle manufacturer is only given to identify the product offered as an accessory or spare part, in order to clarify for which vehicle the offered product is suitable.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert support: Solve your installation and product problems