Description
Special feature:
Powerful function: This tool is used to correctly and without damage fix the cam device when removing/installing the cam device's mounting screw.
Improved design: The tool is designed for installation inside the gearbox and engages in a shock-absorbing hole in the camshaft drive gear.
High-quality material: Made from high-strength, impact-resistant iron and with a black coating for corrosion resistance, ensuring a longer service life.
Specifications:
Product name: Cam gear holding tool
Condition: Brand new
Warranty: 180 days
Equipment type: Direct replacement
Suitable for:
For Detroit Diesel Series 60 engines.
Note: Alternatives to J-35652-A
Instructions for use:
1. Insert the shoe of the camshaft drive gear torque holding tool, J 35652-A, part of J 35652, through a relief hole in the camshaft drive gear.
2. Using the 3/4 inch square hole in the center of the crankshaft pulley, tilt the engine slightly to position the camshaft drive gear holding tool so that the screw holes in the holding tool align with the screw holes of the access cover in the transmission housing cover.
3. Attach the torque holding tool J 35652-A (part of J 35652) for the camshaft drive gear to the gearbox housing, engaging it in one of the relief holes in the camshaft drive gear. Secure the tool to the gearbox housing with the two access cover screws.
Package contents:
1 x Camshaft holding tool (as shown in the pictures!!!)
Note:
1. All measurements are taken by hand; slight deviations may occur.
2. The color may vary slightly due to the color settings of each individual monitor.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems