Description
Characteristics :
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications :
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Dimensions :
Cable length: approx. 530 mm
Other specifications :
Number of wires: 4
Number of plugs: 1
Number of pens: 4
Number of sensors: 2
PART NUMBER(S) :
30310-ZW1-003
equipment :
Suitable for Honda 4-stroke outboard motors
Suitable for Honda BF75 75 HP 1997-2006
Suitable for Honda BF90 90PS 1997-2006
Package includes :
1x Pulsar coil
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we provided to Decide Fitments.)
A NOTICE :
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
guarantee :
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Dimensions :
Cable length: approx. 530 mm
Other specifications :
Number of wires: 4
Number of plugs: 1
Number of pens: 4
Number of sensors: 2
PART NUMBER(S) :
30310-ZW1-003
equipment :
Suitable for Honda 4-stroke outboard motors
Suitable for Honda BF75 75 HP 1997-2006
Suitable for Honda BF90 90PS 1997-2006
Package includes :
1x Pulsar coil
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we provided to Decide Fitments.)
A NOTICE :
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
guarantee :
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
