Description
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement for your original device.
Plug-and-play, direct fit, easy installation.
Often not available from the OEM manufacturer.
All shipped products are tested.
Specifications:
Condition: Aftermarket 100% brand new
Quantity: 1 PC
Type: Pulsar coil
Mass:
Height: 18.8 mm
Length: 26.5 mm
Width: 20.9 mm
Mounting distance from center to center: 35.3 mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pens: 2
PART NUMBERS:
59026-1126
Equipment:
Suitable for Kawasaki EN400 Bulcan 400 1994
Suitable for Kawasaki EN500 Vulcan 500 B1 B2 1994-1995
Suitable for Kawasaki EX400 EX-4 1994-1995
Suitable for Kawasaki EX500 Ninja 500 1994–2005
Suitable for Kawasaki EX500 Ninja 500R 2006–2009
Suitable for Kawasaki EX500 1994–2002
Suitable for Kawasaki EX500 GPZ500S 1994–2005
Package contents:
1x Pulsar coil
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we provided to Decide Fitments.)
A NOTICE:
Failure to follow these instructions may result in damage to the part or other components on your vehicle.
- Solder the wires to those of your OEM wiring harness using a small soldering iron.
-Insulate your solder joints with heat shrink tubing.
-Before attempting to start your vehicle, the air gap must be adjusted on certain models.
- Rotate the flywheel by hand so that the raised node is aligned with the pickup/pulsar coil, and adjust it as close as possible but not less than 0.010 inches.
-If no spark or irregular spark occurs, swap the wires at the connector.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
