Description
Feature:
This is a cleaned, thoroughly tested and sealed printhead for 564 ink.
If the printhead cannot print colors, please remove the printhead from your printer and touch the nozzle of the printhead with a white cloth.
If the ink is printed on the tissues, it does not necessarily mean that the printhead is at fault, and you need to continue troubleshooting.
The printhead has been cleaned and tested and may contain a protective solution and moisture, but this does not affect its use.
This is an aftermarket replacement part, but not an original part.
Size: 85 x 75 mm
Specifications: 5-slot
Type: 564 Printhead
Compatible models:
Compatible part numbers: CN642A/CB326-30001/CB326-30002
Refurbished 564 printhead
for PhotoSmart 7510 7515 7520
for PhotoSmart C309A C309G C309N C310A C410A C510A C310a C311a
for PhotoSmart B8550 C6340 C6350 C6380 D5445 D5460 D7560
for HP Photosmart B209A
Package includes:
1 x 564 printhead
Note:
1. Please switch off the printer after entering a print value, otherwise the mainboard chip will burn out.
After inserting the printhead, please do not install a ribbon on more than 10 A4 documents.
This allows the new needle to break in, and then insert the ribbon. I hope you can operate carefully.
2. If the original printhead was broken and, in particular, ink leaked out, the mainboard may have burned out.
Therefore, please resolve the mainboard issue before replacing the printhead. Additionally,
The ignition cable F1, F2 of the mainboard can only be replaced by the original ignition unit, which has the same current rating and model.
If the detonator is replaced with one that has a higher current value and a different model, both the printhead and the mainboard may be damaged.
3. The printhead requires careful attention. It is easy to cause damage if a layperson replaces the printhead blindly.
There is a regulation stating that the printhead has no warranty and is delicate and expensive.
Please do not attempt to start up the machine and please handle it with care.
4. If you are not familiar with the device, it is recommended that you send the printhead to a repair station.
or find professionals to replace the nozzle to avoid unnecessary losses and hassle.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems
