Description
Special feature:
1: Made of high-quality material, durable and practical to use.
2: High performance, long service life.
3: Easy installation and removal.
4: Professional installation is strongly recommended; installation instructions are not included.
5: Designed and manufactured to demanding specifications that meet or exceed OEM performance.
Special features:
Condition: 100% brand new
Material: Rubber-plastic
Type: Cylinder gasket set
Seal size: 40" Hole x 1,75"
Equipment type: Direct replacement
1. Cylinder tube bore (inner diameter) 4.5 inches x rod (outer diameter) 1.75 inches. Please note: The bore size of 4.5 inches does not correspond to the outer diameter of the cylinder tube. The size of the cylinder rod corresponds to the inner diameter of the tube.
2. Wear rings.
Piston wear ring: 114.3 mm (outer diameter 4.5 in) x 107.95 mm (inner diameter 4.25 in) x 9.53 mm (0.375 in wide), nylon
Rod wear ring: 44.5 mm (ID 1.752 in) x 50.8 mm (outer diameter 2 in) x 9.53 mm (0.375 in wide), nylon
3. Piston seals
1 square ring and 1 O-ring. Piston square ring: 114.3 mm x 104.3 mm x 3.28 mm; O-ring (installed under the square ring): 103 mm x 2.65 mm. CPU + NBR
4. Rod O-ring (Element 13): 44.5 mm x 54 mm x 5 mm, CPU. An O-ring is located inside.
5. Rod dust ring (item 12): 44.5 mm x 54 mm, 5.5 mm/7.3 mm, TPU
Below you will find the specification of a cylinder with 4,5" Hole x 1,75" Rod that the OEM manufactured with this seal kit:
Retracted (center to center between pole hole and fork crown hole: 32.4 inches)
Extended (from center to center as above): 56.4 inches
Hub: 24 ± 0.05 inches
Dimension from the center of the fork crown hole to the rear of the cylinder: 2.95 inches
Measurement from the center of the rod end hole to the front of the rod: 1.06 inches
Dimension from the center of the rod end hole to the front of the cylinder: 1.18 inches
Connections: 1/2" NPT
Dimensions from port to port: 25.4 inches
Rod: 1.75-inch rod
Hole at the end of the pole: 0.55 inches
Hole at Clevis Mountain: 1.16 inches
Dimension between fork crown and fork head: 0.87 inches
Thickness of each mountain fork crown: 0.375 inches
Length of each mounting fork head: 4.125 inches
Note:
1. Please allow 1-3 mm difference due to manual measurement.
2. Please note that this part is not an original part, but an aftermarket part.
3. Before you buy, please confirm whether it is suitable for you.
Package contents:
1 x cylinder gasket set
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems