Description
Generator-stator-regulator-rectifier assembly for Daytona 675/675R 2008-2012
Features:
The set includes a stator and regulator.
Meets or even exceeds OEM quality; direct replacement for your original part.
It fits perfectly and is ready for immediate installation.
Always use a sealant when installing the cable gland.
Instructions are NOT included.
Attention:
One of the most common reasons for stator failure is a defective regulator, which burns out the stator in a very short time.
We therefore strongly recommend that you replace both parts.
Technically modified stators are excluded from replacement.
Specifications:
Condition: Used part, 100% new
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 5
Number of connectors: 1x T-shaped 3-pin connector and 1x oval 2-pin connector
Number of pins: 2 + 3
Number of mounting holes: 3
Number of masts: 18
Outer diameter: 115 mm
Inner diameter: 42 mm
Includes recording reel.
regulator
Number of electrical outlets: 2
Number of pins: 2 + 3
Please compare the number of pins and connectors with the old part before purchasing.
Part number:
Stator assembly: T1300039
Rectifier, regulator: T1301234, T1300570, T1300675
(Always compare the part numbers with the part drawings and make appropriate cross-references.)
(This is NOT an original part. The OEM part numbers are used for product identification and comparison purposes only.)
Suitable for make/model/year:
Please check the compatibility of the connector between the stator and the controller, as there were two versions, and select the correct one.
This stator exclusively replaces the OEM part number T1300039 and was used in vehicles with a chassis number up to 381274 or with a chassis number from 381275 to 564947.
NOT suitable for vehicles with a chassis number (VIN) higher than 564948
Fits Daytona 675 2008-2012
Suitable for Daytona 675 R 2011-2012
This stator exclusively replaces OEM part number T1300039 and was used in vehicles with a chassis number between 456777 and 560475.
Suitable for Street Triple 675 2008-2012
Suitable for Street Triple 675R 2009-2012
(The compatibility table is for reference only!!!)
(Please compare your defective device with the image we have provided to check compatibility.)
Scope of delivery:
1 x 115mm stator
1 x 5-pin regulator
(Delivered exactly as pictured.)
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any burnt-out cables.
Use high-temperature dielectric grease on all connectors.
Our stator/regulator may use a different cable color code than your original part.
All wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
Threadlocker must always be used when screwing on the stator.
If our stator contains a pickup coil, be sure to pay attention to the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, please compare our item with your original part.
The product offered is an accessory or spare part and therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is only given to identify the product offered as an accessory or spare part, in order to clarify for which vehicle the offered product is suitable.
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour expert online service: We solve your installation and product problems.
