Description
7-core generator stator regulator rectifier gasket set for Honda XR400R 1996–2004
Characteristics:
The set includes stator, regulator, rectifier and gasket.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator, which causes the stator to burn out within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: New (Aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 7
Number of plugs: 3
Number of pins: 5 + 1 + 1
Number of mounting holes: 3
Number of poles: 12
Inner diameter: 53 mm
Outer diameter: 115 mm
Included in the scope of delivery: Pulse generator coil.
Part number:
Stator assembly: 31120-KCY-651
Rectifier, regulator: 31410-KCY-671, 31600-KA2-751
Gasket, generator cover: 11395-KCY-671, 11395-KCY-672
(Always compare the part numbers with your exploded views and use cross-references where appropriate.)
(This is NOT an original part. The OEM part numbers are used for product identification and comparison purposes only.)
Suitable for make/model/year:
Suitable for Honda XR400R 1996–2004 (EU/AU market)
There are two stator versions for the XR400.
This stator version is used for part number 31120-KCY-651 and has 3 connectors and 7 wires.
If your stator part number is 31120-KCY-671, you will need a stator with 5 connectors and 6 wires.
Carefully inspect your stator assembly and compare the appearance of the stator closely before ordering.
(The compatibility table is for reference only!)
(Please compare your defective component with the image we have provided to determine the compatible models.)
Scope of delivery:
1 x 7-core generator stator
1 x controller
1 x crankcase seal
(Delivery as pictured.)
A notice:
Before installing your new stator regulator rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part. All cables are connected in the correct order; please do not change the wiring.
This stator is designed as a direct replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, be sure to ensure the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.
The name of the vehicle manufacturer is only mentioned to identify the offered product as an accessory or spare part, in order to clarify for which vehicle the product is suitable.
Characteristics:
The set includes stator, regulator, rectifier and gasket.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator, which causes the stator to burn out within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: New (Aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 7
Number of plugs: 3
Number of pins: 5 + 1 + 1
Number of mounting holes: 3
Number of poles: 12
Inner diameter: 53 mm
Outer diameter: 115 mm
Included in the scope of delivery: Pulse generator coil.
Part number:
Stator assembly: 31120-KCY-651
Rectifier, regulator: 31410-KCY-671, 31600-KA2-751
Gasket, generator cover: 11395-KCY-671, 11395-KCY-672
(Always compare the part numbers with your exploded views and use cross-references where appropriate.)
(This is NOT an original part. The OEM part numbers are used for product identification and comparison purposes only.)
Suitable for make/model/year:
Suitable for Honda XR400R 1996–2004 (EU/AU market)
There are two stator versions for the XR400.
This stator version is used for part number 31120-KCY-651 and has 3 connectors and 7 wires.
If your stator part number is 31120-KCY-671, you will need a stator with 5 connectors and 6 wires.
Carefully inspect your stator assembly and compare the appearance of the stator closely before ordering.
(The compatibility table is for reference only!)
(Please compare your defective component with the image we have provided to determine the compatible models.)
Scope of delivery:
1 x 7-core generator stator
1 x controller
1 x crankcase seal
(Delivery as pictured.)
A notice:
Before installing your new stator regulator rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part. All cables are connected in the correct order; please do not change the wiring.
This stator is designed as a direct replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, be sure to ensure the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.
The name of the vehicle manufacturer is only mentioned to identify the offered product as an accessory or spare part, in order to clarify for which vehicle the product is suitable.