Description
10A/20A/30A/40A/50A/60A PWM Solar Charge Controller Mobile App Intelligent Control 12V/24V/36V/48V/60V Solar Charge Controller Display Current Solar Street Light Controller 0V Start
The specifications:
1. Rated voltage: 12V/24V/36V/48V/60V
2. Charging current: 10A/20A/30A/40A/50A/60A
3. Discharge current: 10A/20A/25A
4. Application: Solar system controller
5. Size: 134 * 70 * 35 mm
6. Weight: 150 g
7. Standby power consumption: <10 mA
8. USB output: 5V/2A MAX
9. Operating temperature: -35 to +60°C
Safety instructions:
1. This controller automatically adjusts to 12V/24V or another version (12/24/36/48/60V) to manually set the appropriate battery charging mode. During initial installation, ensure the battery has sufficient voltage to start and automatically adjust the controller parameters.
2. Install the controller as close as possible to the battery to avoid voltage drop due to excessively long cables, which would impair normal voltage assessment.
3. This controller is suitable for charging lead-acid, solid-state, lithium, lithium iron phosphate, and other batteries. When charging lithium batteries, you must be familiar with the battery's characteristics, and the charging parameters must be set after connecting to the power supply before use. For example, when charging a 12V lithium battery, the output cutoff is set to 9.5V, the full cutoff is 12.2V, and the charging voltage is 11.5V when the battery voltage drops.
4. This controller can only use photovoltaic modules as a charging source. Do not use direct current or other power sources as a charging source.
5. This controller generates heat during operation. Ensure that the controller is installed on a flat, well-ventilated surface.
6. When charging lithium batteries, you must use a battery protection board and choose products from certified lithium battery manufacturers that comply with national requirements. Direct charging without a protection board is strictly prohibited. Unauthorized modifications to lithium battery packs for charging purposes are strictly prohibited.
Features:
1. Built-in industrial microcontroller.
2. Large LCD display, all parameters adjustable.
3. Complete 3-stage PWM charging management.
4. Built-in lightning protection, overheating, overcurrent, short circuit, open circuit and reverse connection protection; all types of automatic recovery will not damage the controller.
5. Dual MOSFET reverse current protection, low heat generation.
6. The regulated high-current side is charged and placed, and the load is stably delivered to the load under full load conditions and is suitable for use in an inverter or monitoring device.
Package contents:
1x PWM solar controller
1 x User manual
Guarantee:
Returns: Customers have the right to request a return within 60 days of receiving the product.
24-hour online expert: Solve your installation and product problems